Available 3 files for Digi PortServer 16 RJ45 48VDC Hi Temp
Select Files
Company
Digi
Categories
Other Peripherals
Model
Digi PortServer 16 RJ45 48VDC Hi Temp
Description
Drivers
Operating System
Windows 2000-XP-2003
Size Driver
972KB
File Name
40002164_s.zip
Observations
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Help and Documentation
5 Release History
1. INTRODUCTION
This document contains general information as well as
last minute changes for the Digi RealPort driver and
Setup Wizard.
2. SUPPORTED OPERATING SYSTEMS
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows Server 2003
3. SUPPORTED PRODUCTS
Digi Connect Family
Digi EtherLite Family
Digi Flex Family
Digi One Family
Digi PortServer Family
Digi PortServer TS Family
Digi PortServer TS MEI Family
Digi PortServer TS W MEI Family
Digi PortServer TS M MEI Family
Digi PortServer TS H MEI Family
Digi PortServer TS P MEI Family
4. HELP AND DOCUMENTATION
Help and Documentation for installing, updating, removing and
configuring Digi RealPort for Windows can be found in the help
file, digirlpt.chm.
digirlpt.chm is part of the same software package as this file.
To view the help file, browse to the directory containing the
software package and double-click on the file, digirlpt.chm.
If a Digi RealPort device is installed, the help file can also
be accessed from the Device Manager, via the device's Multi-port
serial adapters property page.
5. HISTORY
Version 3.2.281.0, 11/17/2005 (Rev. S)
--------------------------------------------
o Added feature to optimize network usage for different
networks -- i.e., wired, wireless, and cellular.
o Added 'examine' command to RealPort Setup Wizard CLI
to simplify driver backup, restoration and deployment.
o Added option to use device MAC or DNS name rather than IP address.
o Added digirlpt.chm context and HTML help.
o Updated 'change' command in RealPort Setup Wizard CLI to
support /id, /likeid, /com, and /likecom switches.
o Fixed RTS toggle to not require CTS to be asserted to send.
o Added feature to coalesce data for legacy applications.
o Corrected processing of SERIAL_NULL_STRIPPING.
o Resolved transmission issue with offline device when
port is configured for Always Grant Port Open Requests.
o Corrected support of XonLimit and XoffLimit.
Company
Digi
Categories
Other Peripherals
Model
Digi PortServer 16 RJ45 48VDC Hi Temp
Description
Drivers
Operating System
Windows 98-98Se-Me
Size Driver
169KB
File Name
40002297_e.zip
Observations
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Installing the RealPort Driver
6 Updating the RealPort Driver
7 Additional Notes
8 History
1. INTRODUCTION
This document describes the Digi RealPort Device Driver
for Microsoft Windows 98 and Me.
Refer to the following number when searching the Digi
International Inc. web site (www.digi.com) or the ftp
site (ftp.digi.com) for the latest software package:
40002297_
2. SUPPORTED OPERATING SYSTEMS
Microsoft Windows 98
Microsoft Windows Me
3. SUPPORTED PRODUCTS
Digi Connect Family
Digi EtherLite Family
Digi Flex Family
Digi One Family
Digi PortServer Family
Digi PortServer TS Family
Digi PortServer TS MEI Family
Digi PortServer TS W MEI Family
Digi PortServer TS M MEI Family
Digi PortServer TS H MEI Family
Digi PortServer TS P MEI Family
4. KNOWN LIMITATIONS
After installing a new device in Windows ME, please reboot
your system for the ports to become accessible.
The Device Manager incorrectly reports bogus resources for
each of the RealPort serial ports (see the Ports (COM & LPT)
category of the Device Manager). This is a limitation of the
operating system, which requires that serial ports are
associated with a physical address space, albeit phantom.
If you plan to use the RealPort driver with serial printers,
you may want to reboot the system after device installation or
after renaming ports to see the new ports listed in the Print
Spooler's list of available ports. This is a known limitation
of the Print Spooler, which does not detect changes in the
list of available ports automatically.
If you experience difficulties operating serial printers, try
enabling the option, "Complete write requests immediately."
A checkbox of the same name can be found in the port's Port
Properties dialog in the Device Manager.
5. INSTALLING THE REALPORT DRIVER
To install the driver, follow these steps:
o Close the Device Manager if it is running.
o Unzip the driver archive to a folder of your choice.
o Run DIGIRPCL.BAT to remove any previous INF file versions.
Company
Digi
Categories
Other Peripherals
Model
Digi PortServer 16 RJ45 48VDC Hi Temp
Description
Drivers
Operating System
Windows NT
Size Driver
729KB
File Name
40001738_r.zip
Observations
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Upgrading RealPort
6 Additional Notes
7 History
1. INTRODUCTION
This document describes the service that supports the
Digi devices listed below. The service is for use
with Microsoft Windows NT 4.0.
Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:
40001738_
2. SUPPORTED OPERATING SYSTEMS
Microsoft Windows NT 4.0, Service Pack 5 or better
3. SUPPORTED PRODUCTS
Digi Connect Family
Digi EtherLite Family
Digi Flex Family
Digi One Family
Digi PortServer Family
Digi PortServer TS Family
Digi PortServer TS MEI Family
Digi PortServer TS W MEI Family
Digi PortServer TS M MEI Family
Digi PortServer TS H MEI Family
Digi PortServer TS P MEI Family
4. KNOWN LIMITATIONS
Changing the baud rate of a serial printer requires deleting
the printer device and then re-adding the device with a
different baud rate. This is a Print Manager limitation in
Windows NT 4.0.
If you plan to use the RealPort service with serial
printers, you have to reboot the system after device
installation or after renaming ports to see the new ports
listed in the Print Spooler's list of available ports for
printing. This is a known limitation of the Print Spooler,
which does not detect changes in the list of available ports
automatically.
If you experience problems printing to a serial printer,
navigate to the device's Device Properties dialog in the
Device Manager, enable "Complete Write Requests Immediately,"
and try printing again.
Access to Official Website Digi
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.