Envoy Data EDC-ISA Other Peripherals

Company

Envoy Data

Categories

Other Peripherals

Model

Envoy Data EDC-ISA

Description

Drivers

Operating System

MS-Dos-Windows 3.x

Size Driver

809KB

File Name

drivers3xdos.zip

Observations

For thoes who needs functions of binary reading/writting memory card(SRAM or
Flash) or booting from memory card(SRAM or FLASH), this release note descripes
how to use these functions which are not stated in the User's Guide.

Note: For boot function, the package you have must include a
BOOT ROM on the ISA bus interface card.

For using Flash card , the package you have must include Flash File
System II(FFS2)or FTL in the software installation diskette.

For Binary Reading/Writting functions, this pagkage support some utilities .
The utilities are located in the \UTILITY subdirectory on supplied diskette.

IMERASE.EXE--Erase memory card
==============================

IMERASE.EXE is invoked by a command of the following form:

IMERASE /SIZE=card size /S=socket number /TYPE=card type

size of memory card: 64K,128K,256K,512K,1MB,2MB,4MB,8MB,10MB,16MB,20M,40M
socket Number : 0,1
card type : SRAM,FLASH

Example : IMERASE /SIZE=1MB /S=0 /TYPE=FLASH
IMWRITE.EXE--Write binary file to memory card
=============================================

IMWRITE.EXE is invoked by a command of the following form:

IMWRITE /SIZE=card size /S=socket number /TYPE=card type /F=filename

size of memory card: 64K,128K,256K,512K,1MB,2MB,4MB,8MB,10MB,16MB,20M,40M
socket number : 0,1
card type : SRAM,FLASH
file name : path\filename (default value = card.dat)

Example : IMWRITE /SIZE=1MB /S=0 /Type=FLASH /F=card.dat

IMREAD.EXE-- Read memory card as binary file
============================================

IMREAD.EXE is invoked by a command of the following form:

IMREAD /SIZE=card size /S=socket number /F=filename

size of memory card: 64K,128K,256K,512K,1MB,2MB,4MB,8MB,10MB,16MB,20M,40M
socket No : 0,1
file name : path\filename (default value = card.dat)

Example : IMREAD /SIZE=1MB /S=0 /F=card.dat
After preparing a SRAM card for booting, insert this SRAM card to the
Second socket, then reset your PC (Please let your PC booting from A:
drive firstly by setting up CMOS), system will boot from SRAM card, and
your SRAM card will install as following :

The first socket is installed as C: (If there is no C: drive)
The second socket is installed as A:

Drive A is read only , that means you can't copy files into drive A. If you
need store data, you can use another memory(Flash or SRAM) or ATA card in the
first socket.

Company

Envoy Data

Available 2 files for Envoy Data EDC-ISA

Select Files