I-OMagic MagicIde 100 PCI Other Peripherals

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic MagicIde 100 PCI

Description

DR-Ide100 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows 2000

Size Driver

21KB

File Name

ide100promise_win2k.zip

Observations

[Version]
Signature="$CHICAGO$"
Provider=%OWC%
Class=USB
ClassGuid={36FC9E60-C465-11CF-8056-444553540000}
DriverVer = 11/30/2001

[SourceDisksNames]
1="EHCI Driver Installation Disk",,,

[SourceDisksFiles]
nehcd.sys = 1
nusbd.sys = 1
nusb2hub.sys = 1

[Manufacturer]
%MfgName%=OWC
%ORANGEMFG%=ORANGE
%SYSTALKMFG%=SYSTALK
%IOGEARMFG%=IOGEAR
%SIIGMFG%=SIIG
%KEYSPANMFG%=KEYSPAN
%ATENGENMFG%=ATENGEN
%ATENMFG%=ATEN
%AVLABMFG%=AVLAB
%UNIXTARMFG%=UNIXTAR
%ACTIONSTARMFG%=ACTIONSTAR
%TRIPPLITEMFG%=TRIPPLITE
%APCMFG%=APC
%BELKINMFG%=BELKIN
%MEGAUSBMFG%=MEGAUSB
%GOODWAYMFG%=GOODWAY
%GWCMFG%=GWC
%DLINKMFG%=DLINK
%PUTERCOMMFG%=PUTERCOM
%BUSLINKMFG%=BUSLINK
%DATAFABMFG%=DATAFAB
%NECMFG%=NEC
%FREECOMMFG%=FREECOM
%SDMLMFG%=SDML
%TEKRAMMFG%=TEKRAM
%APRICORNMFG%=APRICORN
%BILLIONTONMFG%=BILLIONTON
%ADSMFG%=ADS
%EDRIVEMFG%=EDRIVE
%SUNRICHMFG%=SUNRICH

[OWC]
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0
%NUSB2HUB.DeviceDesc%=NUSB2HUB,USB2\CLASS_09&SUBCLASS_00
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_20022041
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_00e03083
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_20002098
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_19109710
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_20503592
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_020514C2
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_20011758
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_00322027
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_00e03194

[SUNRICH]
%SUBSYS_33833383%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_33833383

[BILLIONTON]
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_110114CB
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_110314CB
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_110514CB
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_110714CB
%NEC_USBEHCD.DeviceDesc%=NECEHCD,PCI\VEN_1033&DEV_00E0&SUBSYS_110914CB

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic MagicIde 100 PCI

Description

DR-Ide100 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows 95

Size Driver

85KB

File Name

ide100promise_win9x.zip

Observations

[Version]
CatalogFile=Ultra.cat
signature="$CHICAGO$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%PROMISE%
DriverVer=05/04/2000

; Class Install
[ClassInstall32.NT]
Addreg=SCSIReg

[SCSIReg]
HKR,,,,%SCSIClassName%
HKR,,Installer32,,"SysSetup.Dll,ScsiClassInstaller"
HKR,,Icon,,"-10"
HKR,,LegacyInfOption,,"SCSI"

[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS
System32Dir = 11 ; System32
MoveMiniPort = 12;
MoveMiniPort.NT = 12;
promiseinf = 17,"other"; INF directory
RenMiniport.back = 12
RenMiniport = 12
PTISETUP=11;
ADVPACK=11;

[ControlFlags]
;
; Exclude the following devices from Select Device list.
; These represent 'combination' driver nodes, for which there are separate items to be
; presented to the user. These combination nodes are only used when figuring out what
; driver node to associate with a pre-existing service.
;
; CopyFilesOnly=PCI\VEN_105A&DEV_4D30&SUBSYS_4D33105A&REV_02

[Manufacturer]
%Promise%=Promise

[Promise]
%PCI\VEN_105A&DEV_4D30&SUBSYS_4D33105A.DeviceDesc%=ultra100PCI,PCI\VEN_105A&DEV_4D30&SUBSYS_4D33105A
;%PCI\VEN_105A&DEV_4D38&SUBSYS_4D33105A.DeviceDesc%=ultra66PCI ,PCI\VEN_105A&DEV_4D38&SUBSYS_4D33105A
;%PCI\VEN_105A&DEV_4D33.DeviceDesc% =ultra33PCI ,PCI\VEN_105A&DEV_4D33

;************** U100 **************
[ultra100PCI]
CopyFiles=MoveMiniPort,PTISETUP,ADVPACK
AddReg=ios,ultraPCI.reg,RegUninstall100
;RenFiles=RenMiniport
Reboot

[Ultra100PCI.Uninstall]
DelReg=RegUninstall.del,UltraPCI.Del.Reg
DelFiles=promiseinf,MoveMiniPort,PTISETUP
;RenFiles=RenMiniport.back
Reboot

[Ultra100PCI.Uninstall.NT]
;DelReg=RegUninstall.del
;DelFiles=MoveMiniPort.NT
;Reboot

[ultra100PCI.NT]
;CopyFiles=MoveMiniPort.NT
;Reboot

[ultra100PCI.NT.Services]
;AddService = Ultra, 2, ultraPCI_Service_Inst, Miniport_EventLog_Inst

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic MagicIde 100 PCI

Description

DR-Ide100 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows 98

Size Driver

261KB

File Name

koutech100.zip

Observations

Table of Contents
-----------------

I) Windows 2000 Fresh Installation Instructions.
II) Install Windows 2000 on Windows NT4.
III) Upgrade Windows 2000.
I) Windows 2000 Fresh Installation Instructions.
------------------------------------------------
Follow these instructions in this section if you are freshly installing
Windows 2000.

You may start up Windows 2000 installation from CD. If your CD-ROM drive is
not bootable, your can start up with floppy diskettes.

1. If you choose to install Windows 2000 from floppies, create four
Windows 2000 set up floppy diskettes from CD before installation.

2. Power off the system and connect hard drives and CD-ROM drives
to the CMD IDE controller. Insert CMD IDE controller to a PCI slot.

3. Put the diskette #1 into drive A or put the CD into CD-ROM/DVD drive
if you choose to boot up from CD. Turn on your computer system.

4. Press 'F1' key to enter IDE mode when IDE controller BIOS is scanning devices.
Notes: This step is required only when you are using a controller BIOS that
default to RAID mode.

5. Continue to insert floppy diskette #2, #3, #4 if you are installing
from floppy diskettes.

6. Wait while files are copied from floppy or CD in the text mode installation.
Caution: Do not press F6 for third party SCSI or RAID driver installation
during this time. CMD PCI0648 controller does not use SCSI or RAID
driver under Windows 2000.

7. Follow setup instructions to select your choices for partitions and file system.

8. After setup examines your disks, it would copy files to Windows 2000
installation folders and restart the system.
Again, Press 'F1' key to enter IDE mode when IDE controller BIOS is scanning devices
if you are using a controller BIOS that default to RAID mode.

The setup program would continue to finish installation after restart.

9. Wait until Windows 2000 finishes installing devices, regional settings,
networking settings, components, and final set of tasks, reboot the system.

10. Go to device manager and install CMD IDE controller driver for Windows 2000 by the
following steps

a. Right click on my computer icon, select properties, left click on 'Hardware'
tab, and then on 'Device Manager' button.

b. Double click on 'IDE ATA/ATAPI controllers', then on 'Standard Dual Channel
PCI IDE controller', left click on 'Driver' tab, then on 'Update Driver' button
to bring up 'Upgrade Device Driver Wizard.'

c. Select 'search for a suitable driver for my device' and click 'next' when install
hardware drivers.

Insert the floppy diskette with CMD driver.

Select 'floppy disk drive' and click 'next' when locate driver files.

At search results, the Driver Wizard either found the a:\win2k\cmdide.inf at the
first time CMD driver is installed or found the c:\winnt\inf\oem0.inf if the cmdide.inf
has been installed to the hard disk before.

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic MagicIde 100 PCI

Description

DR-Ide100 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows 98

Size Driver

85KB

File Name

ide100promise_win9x.zip

Observations

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic MagicIde 100 PCI

Description

DR-Ide100 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows NT

Size Driver

25KB

File Name

ide100promise_nt4.zip

Observations

[Version]
CatalogFile=Ultra.cat
signature="$CHICAGO$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%PROMISE%
DriverVer=05/04/2000

; Class Install
[ClassInstall32.NT]
Addreg=SCSIReg

[SCSIReg]
HKR,,,,%SCSIClassName%
HKR,,Installer32,,"SysSetup.Dll,ScsiClassInstaller"
HKR,,Icon,,"-10"
HKR,,LegacyInfOption,,"SCSI"

[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS
System32Dir = 11 ; System32
MoveMiniPort = 12;
MoveMiniPort.NT = 12;
promiseinf = 17,"other"; INF directory
RenMiniport.back = 12
RenMiniport = 12
PTISETUP=11;
ADVPACK=11;

[ControlFlags]
;
; Exclude the following devices from Select Device list.
; These represent 'combination' driver nodes, for which there are separate items to be
; presented to the user. These combination nodes are only used when figuring out what
; driver node to associate with a pre-existing service.
;
; CopyFilesOnly=PCI\VEN_105A&DEV_4D30&SUBSYS_4D33105A&REV_02

[Manufacturer]
%Promise%=Promise

[Promise]
%PCI\VEN_105A&DEV_4D30&SUBSYS_4D33105A.DeviceDesc%=ultra100PCI,PCI\VEN_105A&DEV_4D30&SUBSYS_4D33105A
;%PCI\VEN_105A&DEV_4D38&SUBSYS_4D33105A.DeviceDesc%=ultra66PCI ,PCI\VEN_105A&DEV_4D38&SUBSYS_4D33105A
;%PCI\VEN_105A&DEV_4D33.DeviceDesc% =ultra33PCI ,PCI\VEN_105A&DEV_4D33

;************** U100 **************
[ultra100PCI]
;CopyFiles=MoveMiniPort,PTISETUP,ADVPACK
;AddReg=ios,ultraPCI.reg,RegUninstall100
;RenFiles=RenMiniport
;Reboot

[Ultra100PCI.Uninstall]
;DelReg=RegUninstall.del,UltraPCI.Del.Reg
;DelFiles=promiseinf,MoveMiniPort,PTISETUP
;RenFiles=RenMiniport.back
;Reboot

[Ultra100PCI.Uninstall.NT]
DelReg=RegUninstall.del
DelFiles=MoveMiniPort.NT
Reboot

[ultra100PCI.NT]
CopyFiles=MoveMiniPort.NT
Reboot

[ultra100PCI.NT.Services]
AddService = Ultra, 2, ultraPCI_Service_Inst, Miniport_EventLog_Inst

Access to Official Website I-OMagic

Home English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 6 files for I-OMagic MagicIde 100 PCI

Select Files