Available 7 files for Lava PCI 1 Port RS-232

Company

Lava

Categories

Other Peripherals

Model

Lava PCI 1 Port RS-232

Description

LP

Operating System

MS-Dos-Windows 3.1

Size Driver

24KB

File Name

w31dspci.exe

Observations

NOTES ON INSTALLATION OF THE LAVA SERIAL DEVICE ON THE LAVA DSERIAL PCI CARD IN WIN 3.X

1) With the power off on your computer, insert the Lava DSERIAL PCI card into an empty PCI slot.
2) Power up the computer and boot into DOS mode.
3) Run the lavaconf.exe utility found on the Win3.1 directory on the diskette provided.
4) Record the IO addresses and IRQ that it reports.
5) Boot into Win3.X and enter Control Panel and then Ports.
6) Modify the IO addresses and IRQ for the COM3 and COM4 port to match what you have recorded in step 4.
7) Restart Win3.X.

KNOWN ISSUES

Win3.X only has the ability to install up to 4 COM ports.
NOTE: This utility can also be used for the configuration of COM ports under DOS. Use the addresses and IRQ reported in by this utility to configure the ports in your DOS application. Refer to the DOS applications manual or Readme.txt for details on how to configure the port.

Company

Lava

Categories

Other Peripherals

Model

Lava PCI 1 Port RS-232

Description

16650 UART

Operating System

Windows 2000-XP

Size Driver

55KB

File Name

lavaport2000.zip

Observations

[Version]
Signature="$CHICAGO$"
Class=Ports
ClassGuid= {4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Mfg%

;DriverVer=11:07 AM 6/12/00,5.00.2183.1

; Install class "Ports"
;----------------------------------------------------------
[ClassInstall]
AddReg=PortsClass.AddReg

[Manufacturer]
%Mfg%=Models

[DestinationDirs]
DefaultDestDir=12
DriversDestDir=11
DriverFile.Copy=12
PropPage.Copy=11

[PortsClass.AddReg]
HKR,,,,%PortsClassName%

[ClassInstall32.NT]
AddReg=PortsClass.NT.AddReg

[PortsClass.NT.AddReg]
HKR,,,,%PortsClassName%
HKR,,Icon,,"-23"
HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"

[Models]
%SSerial650PCI.DeviceDesc%=ComPort650,PCI\VEN_1407&DEV_0600
%DSerial650PCI_A.DeviceDesc%=ComPort650,MF\DPORT650PCI_A ; DSerial650-PCI A
%DSerial650PCI_B.DeviceDesc%=ComPort650,MF\DPORT650PCI_B ; DSerial650-PCI B
%Quad650PCI_A.DeviceDesc%=ComPort654,MF\QD650PCI_A ; Quad 650 PCI A
%Quad650PCI_B.DeviceDesc%=ComPort654,MF\QD650PCI_B ; Quad 650 PCI B
%Quad650PCI_C.DeviceDesc%=ComPort654,MF\QD650PCI_C ; Quad 650 PCI C
%Quad650PCI_D.DeviceDesc%=ComPort654,MF\QD650PCI_D ; Quad 650 PCI D
%Quad950PCI_A.DeviceDesc%=ComPort954,MF\QD950PCI_A ; Quad 950 PCI A
%Quad950PCI_B.DeviceDesc%=ComPort954,MF\QD950PCI_B ; Quad 950 PCI B
%Quad950PCI_C.DeviceDesc%=ComPort954,MF\QD950PCI_C ; Quad 950 PCI C
%Quad950PCI_D.DeviceDesc%=ComPort954,MF\QD950PCI_D ; Quad 950 PCI D
%OCT950PCI_Port1.DeviceDesc%=ComPort954,MF\OS950PCI_1
%OCT950PCI_Port2.DeviceDesc%=ComPort954,MF\OS950PCI_2
%OCT950PCI_Port3.DeviceDesc%=ComPort954,MF\OS950PCI_3
%OCT950PCI_Port4.DeviceDesc%=ComPort954,MF\OS950PCI_4
%OCT950PCI_Port5.DeviceDesc%=ComPort954,MF\OS950PCI_5
%OCT950PCI_Port6.DeviceDesc%=ComPort954,MF\OS950PCI_6
%OCT950PCI_Port7.DeviceDesc%=ComPort954,MF\OS950PCI_7
%OCT950PCI_Port8.DeviceDesc%=ComPort954,MF\OS950PCI_8
[ControlFlags]
ExcludeFromSelect=*

;---------------Serial 650 Port Section
[ComPort650.NT]
CopyFiles=DriverFile.Copy,PropPage.Copy
AddReg=ComPort650.AddReg,ComPort650.NT.AddReg

[ComPort650.Det]
AddReg=ComPort650.AddReg,DevMap.AddReg

[ComPort650.AddReg]
HKR,,PortSubClass,1,01

Company

Lava

Categories

Other Peripherals

Model

Lava PCI 1 Port RS-232

Description

16650 UART

Operating System

Windows 3.1

Size Driver

366KB

File Name

w31sspci.exe

Observations

Setup for LavaPort PCI under Windows 3.1/3.11

1) Please note that Windows 3.1/3.11 does not support more than 4 Com Ports. Windows 3.1/3.11 users are therefore strongly recommended to set the LavaPort PCI jumper to the Com 3 position. After this is done, insert the LavaPort PCI into a PCI slot in your system (make sure power is off).

2) Power on your PC. If the system automatically enters Windows, exit to DOS.

3) Copy the file "Lavaconf.exe" from the Win3.11 directory of the LavaPort PCI floppy diskette to your hard drive.

4) Run Lavaconf.exe

5) Lavaconf.exe will display the two I/O addresses and one IRQ that are used by the LavaPort PCI. Make a note of them.

6) If Lavaconf.exe reports "IRQ=0", you will need to manually make an IRQ available to the PCI bus through CMOS (BIOS) settings. To do this reboot the system, and press DELETE to enter CMOS. Each CMOS setting is different, but most have a PCI configuration screen that will list IRQ assignments. Assign an unused IRQ to the PCI bus.

7) Enter Windows (WIN)

8) Install the Windows 3.1/3.11 driver. To do this click File, Run, and then access Setup.exe in the Win3.11 subdirectory on the LavaPort PCI diskette. The driver will install and ask you to reboot your system. After reboot, the Lava Configuration Utility will appear.

9) Using the Lava Configuration Utility, configure your Com Ports for the proper UART type, I/O address, IRQ, etc. You may use the Lava Configuration Utility to configure your existing (non-Lava) Com Ports as well as the LavaPort PCI. If you have 2 Com Ports previously installed on your mainboard, the LavaPort PCI ports will be configured as Com 3/4, but you will have to manually type in the I/O address and IRQ (as reported by Lavaconf.exe) into the appropriate screens.

10) In the Windows subdirectory, find the file called "System.ini" and open it using Write or Notepad. In this file there will be 2 lines that read:

ComXSHAREIRQ=0

where X are the port numbers (usually 3 & 4) that you have assigned in Step 9 using the Lava Configuration Utility. Both of these lines must be changed to

ComXSHAREIRQ=1

11) Save settings, exit Windows, and reboot.

12) Enter Windows and check that all settings have been saved in the Lava Configuration Utility. If you have problems entering the Lava Configuration Utility, you may have to open Control Panel and then Ports to verify your settings. If so, do not make changes in Control Panel, simply enter and exit, then open the Lava Configuration Utility again.

Company

Lava

Categories

Other Peripherals

Model

Lava PCI 1 Port RS-232

Description

16650 UART

Operating System

Windows 95-98-98Se-Me

Size Driver

69KB

File Name

lavaall.exe

Observations

[Version]
Signature="$CHICAGO$"
Class=Ports
ClassGuid= {4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Mfg%

;DriverVer=11:07 AM 6/12/00,5.00.2183.1

; Install class "Ports"
;----------------------------------------------------------
[ClassInstall]
AddReg=PortsClass.AddReg

[Manufacturer]
%Mfg%=Models

[DestinationDirs]
DefaultDestDir=11
DriversDestDir=11
WindowsDir=10

[PortsClass.AddReg]
HKR,,,,%PortsClassName%

[ClassInstall32.NT]
AddReg=PortsClass.NT.AddReg

[PortsClass.NT.AddReg]
HKR,,,,%PortsClassName%
HKR,,Icon,,"-23"
HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"

[Models]
%SPPARALLELPCI.DeviceDesc%=ParallelPort,PCI\VEN_1407&DEV_0511
%SPSSerial550PCI.DeviceDesc%=ComPort550,PCI\VEN_1407&DEV_0510
%PARALLELPCI.DeviceDesc%=ParallelPort,PCI\VEN_1407&DEV_8000
%PIOPCI.DeviceDesc%=PIOPort,PCI\VEN_1407&DEV_0400
%DPARALLELPCI_PortA.DeviceDesc%=ParallelPort,PCI\VEN_1407&DEV_8002
%DPARALLELPCI_PortB.DeviceDesc%=ParallelPort,PCI\VEN_1407&DEV_8003
%SSerial550PCI.DeviceDesc%=ComPort550,PCI\VEN_1407&DEV_0500
%DSASIC_PORTA.DeviceDesc%=ComPort550,PCI\VEN_1407&DEV_0110
%DSASIC_PORTB.DeviceDesc%=ComPort550,PCI\VEN_1407&DEV_0111
%DUAL550PCI_PortA.DeviceDesc%=ComPort550,MF\DS550PCI_A
%DUAL550PCI_PortB.DeviceDesc%=ComPort550,MF\DS550PCI_B
%QUATTRO550PCI_PortA.DeviceDesc%=ComPort550,MF\QS550PCI_A
%QUATTRO550PCI_PortB.DeviceDesc%=ComPort550,MF\QS550PCI_B
%QUATTRO550PCI_PortC.DeviceDesc%=ComPort550,MF\QS550PCI_C
%QUATTRO550PCI_PortD.DeviceDesc%=ComPort550,MF\QS550PCI_D
%OCT550PCI_Port1.DeviceDesc%=ComPort550,MF\OS550PCI_1
%OCT550PCI_Port2.DeviceDesc%=ComPort550,MF\OS550PCI_2
%OCT550PCI_Port3.DeviceDesc%=ComPort550,MF\OS550PCI_3
%OCT550PCI_Port4.DeviceDesc%=ComPort550,MF\OS550PCI_4
%OCT550PCI_Port5.DeviceDesc%=ComPort550,MF\OS550PCI_5
%OCT550PCI_Port6.DeviceDesc%=ComPort550,MF\OS550PCI_6
%OCT550PCI_Port7.DeviceDesc%=ComPort550,MF\OS550PCI_7
%OCT550PCI_Port8.DeviceDesc%=ComPort550,MF\OS550PCI_8

[ControlFlags]
ExcludeFromSelect=MF\OS550PCI_1,MF\OS550PCI_2,MF\OS550PCI_3,MF\OS550PCI_4
ExcludeFromSelect=MF\OS550PCI_5,MF\OS550PCI_6,MF\OS550PCI_7,MF\OS550PCI_8
ExcludeFromSelect=MF\DS550PCI_A,MF\DS550PCI_B
ExcludeFromSelect=MF\QS550PCI_A,MF\QS550PCI_B
ExcludeFromSelect=MF\QS550PCI_C,MF\QS550PCI_D
ExcludeFromSelect=PCI\VEN_1407&DEV_0110,PCI\VEN_1407&DEV_0111
ExcludeFromSelect=PCI\VEN_1407&DEV_0510,PCI\VEN_1407&DEV_0511
ExcludeFromSelect=PCI\VEN_1407&DEV_8000
ExcludeFromSelect=PCI\VEN_1407&DEV_8002,PCI\VEN_1407&DEV_8003

; LPT sections
;----------------------------------------------------------
[ParallelPort]
AddReg=ParallelPort.AddReg,ParallelPort.W95.AddReg
LogConfig=lca
Reboot

Company

Lava

Categories

Other Peripherals

Model

Lava PCI 1 Port RS-232

Description

Drivers

Operating System

Windows 95-98-98Se-Me-2000-XP

Size Driver

52KB

File Name

lavapci.exe

Observations

CONTENTS OF LAVA PCI CARD DISKETTE

\ (root directory)
all driver and installation files for Windows 95/98/ME and 2000 for the following cards:
Single and dual Parallel PCI 95,98,ME,2000
Single Serial 16550 PCI 95,98,ME,2000
Dual Serial 16550 PCI 95,98,ME,2000
Quattro Serial 16550 PCI 95,98,ME
Octopus (Eight port) 16550 PCI 95,98,ME,2000
Single Serial 16650 PCI 95,98,ME
Dual Serial 16650 PCI 95,98,ME
Quad Serial 16650 PCI 95,98,ME
2SP (Dual 16550 Serial Single Parallel) PCI 95,98,ME,2000
SP (Single 16550 Serial Single Parallel) PCI 95,98,ME,2000
LavaPort 650 PCI (Single Port 16650 UART) serial card 95,98,ME
LavaPort PCI (Dual Port 16650 UART) serial card 95,98,ME
LavaPort Plus (Dual 16650 Serial Single Parallel) PCI 95,98,ME
version.txt
contents.txt

\DOS
setaddr.sys
Dos enabler utility for single and dual parallel PCI.
ReadMeP.txt
Installation instructions for setaddr.sys
lavaconf.exe
DOS utility that reports resource assignments (IO address and IRQ) of any Lava PCI card.
ReadMeS.txt
Notes for Installing PCI serial ports in DOS.

\NT4.0
Windows NT4.0 installation program and drivers
NT4.0 ReadMe.txt

\Utils

ComPort Redirect and ModemSpeed installation for PCI Serial Port card Notes.
ModemSpeed only for use with 16650 Serial port cards.
These utilities only for use in Windows 95 and 98.
\utils\Redirect
Redirect utility
\utils\Mdmspeed
Mdmspeed and Redirect

\Win3.11
\16650
Installation program for LavaPort (16650) Serial port cards in Windows 3.11.
Utility for reporting the IO address and IRQ of the PCI cards.
Readme.txt
\16550
Utility for reporting the IO address and IRQ of the PCI cards.
Readme.txt

\Other
lavaconf.exe
Utility for reporting the IO address and IRQ of the PCI cards.
For aiding in the enabling of cards in operating systems other that Win95/98,2000 NT4.0 DOS and Win3.11.

Company

Lava

Categories

Other Peripherals

Model

Lava PCI 1 Port RS-232

Description

Drivers

Operating System

Windows NT4

Size Driver

94KB

File Name

ntpsc5.zip

Observations

- recomMended for users with internal modems on Com 3 or Com 4)

STEP1 BIOS(CMOS SETTINGS)

a) Shut down the Computer and enter your BIOS (CMOS) setup. Ensure that PnP OS installed is set to NO or DISABLED.
Reserve IRQs you have chosen for jumpered cards to Legacy ISA. This will eliminate any possibility of conflicts being created with those devices. Make sure that there is an IRQ available for our card.
Do this in the following manner:
Enter PNP CONFIGURATION SETUP.
Change RESOURCES CONTROLLED BY from AUTO to MANUAL.
Scroll down to the IRQ assigned to our card and change that IRQ from PCI/ISA PnP to Legacy ISA to make it unavailable for our card. If all the IRQs are made unavailable then the LavaPort PCI product will not install.
The previous method applies to an Award BIOS version 4.51 PG. Consult your motherboard manual to find similar settings changes and how to enter your BIOS setup.

STEP2 INSTALLING CARD:

a) With the power off place the Lava Parallel PCI into a PCI slot.
Ensure that the slot is not a Shared PCI/ISA slot. Consult your mother board to verify that the slot is not a shared PCI/ISA slot
b) Power up the computer and boot into Windows NT4.0 and log on as Administrator.
c) Run the setup.exe located on the NT4.0 directory on the floppy.
d) After setup has completed and the system has rebooted verify that the LavaPort has installed properly by going to Start Settings Control Panel and entering the LavaPort Control Panel Applet.

STEP3 ADDRESS ASSIGNMENT (FOR LAVA PARALLEL PCI PORTS ONLY)
To change the address assignment for the Lava Parallel PCI go to Start Settings Control Panel and Double Click the LavaPort Icon.
The LavaPort Control Panel Applet will appear and the Lava Parallel Port(s) will appear under the Lava Parallel Ports Tree.
The Lava Parallel PCI allows for manual Address Assignments. There are two manual addresses available: 0378 and 0278.
To change the address then hilite the port you wish to change and click Properties. In the drop down list for Base I/O Port Address you will have a choice of Default (PCI bus assigned address), 0378 or 0278.
If you are installing a printer to the Lava Parallel PCI choose the PCI Bus assigned address.
If you are installing a non-printer peripheral such as a scanner or external drive then choose either 0278 or 0378 . Ensure that you do not assign the Lava Parallel PCI to an address used by your onboard parallel port. To find out where your OnBoard Parallel Port is installed go to Start - Programs - Adminstrative Tools - Windows NT Diagnostics. Enter the Resources Tab and then click the Devices button to the bottom right. In the list of Devices that appear, double click the ParPort device. The IO address associated with the ISA bus is the OnBoard Parallel Port Address.


TROUBLESHOOTING

The LavaPort drivers will show messages in the Event Viewer regarding success or failure. If you are having trouble with the LavaPort go to Start - Programs - Administrative Tools - Event Viewer. Ensure that the System Log is enabled from the Log Menu. Write down any messages reported by the following services:
DetectLava,
SerialLava,
Serial,
and,
ParPort
Consult Lava's FAQs on our Web Site (www.lavalink.com) for relevant solutions. Or send email to [email protected].
Use of the LavaPort Control Applet:

USE OF LAVA CONTROL PANEL APPLET
1. The LavaPort Control Applet was written in a "Plug and Play" manner. It will attempt to install your card and attempt to show you any conflicts.
2. Information from LavaPort Control Applet installation is written to the System Log. Please refer here for more detailed information.
3. "Lava strongly recommends the use of the LavaPort Control Applet for use with your LavaPort-PCI product, for both installation and to make user-defined settings changes."
4. By clicking in Control Panel - LavaPorts you will find information on your LavaPort-PCI product. Double click it and you will see one of these possibilities:
* Just the icon, indicates NO CONFLICTS.
* Red "X" through the icon, indicates the hardware has been disabled. This can happen if you override the standard Com settings. Accessing the System Log will indicate the overlap in the Com Registers.
* Blue "!" exclamation point, indicates a System Conflict.
* Yellow "?" question mark, indicates a card not enumerated by the System (the conflict is unresolved).

Company

Lava

Categories

Other Peripherals

Model

Lava PCI 1 Port RS-232

Description

1 Port bi-dir

Operating System

Windows NT4

Size Driver

94KB

File Name

ntpsc5.zip

Observations

STEP1 BIOS(CMOS SETTINGS)

a) Shut down the Computer and enter your BIOS (CMOS) setup. Ensure that PnP OS installed is set to NO or DISABLED.
Reserve IRQs you have chosen for jumpered cards to Legacy ISA. This will eliminate any possibility of conflicts being created with those devices. Make sure that there is an IRQ available for our card.
Do this in the following manner:
Enter PNP CONFIGURATION SETUP.
Change RESOURCES CONTROLLED BY from AUTO to MANUAL.
Scroll down to the IRQ assigned to our card and change that IRQ from PCI/ISA PnP to Legacy ISA to make it unavailable for our card. If all the IRQs are made unavailable then the LavaPort PCI product will not install.
The previous method applies to an Award BIOS version 4.51 PG. Consult your motherboard manual to find similar settings changes and how to enter your BIOS setup.

STEP2 INSTALLING CARD:

a) With the power off place the Lava Parallel PCI into a PCI slot.
Ensure that the slot is not a Shared PCI/ISA slot. Consult your mother board to verify that the slot is not a shared PCI/ISA slot
b) Power up the computer and boot into Windows NT4.0 and log on as Administrator.
c) Run the setup.exe located on the NT4.0 directory on the floppy.
d) After setup has completed and the system has rebooted verify that the LavaPort has installed properly by going to Start Settings Control Panel and entering the LavaPort Control Panel Applet.

STEP3 ADDRESS ASSIGNMENT (FOR LAVA PARALLEL PCI PORTS ONLY)
To change the address assignment for the Lava Parallel PCI go to Start Settings Control Panel and Double Click the LavaPort Icon.
The LavaPort Control Panel Applet will appear and the Lava Parallel Port(s) will appear under the Lava Parallel Ports Tree.
The Lava Parallel PCI allows for manual Address Assignments. There are two manual addresses available: 0378 and 0278.
To change the address then hilite the port you wish to change and click Properties. In the drop down list for Base I/O Port Address you will have a choice of Default (PCI bus assigned address), 0378 or 0278.
If you are installing a printer to the Lava Parallel PCI choose the PCI Bus assigned address.
If you are installing a non-printer peripheral such as a scanner or external drive then choose either 0278 or 0378 . Ensure that you do not assign the Lava Parallel PCI to an address used by your onboard parallel port. To find out where your OnBoard Parallel Port is installed go to Start - Programs - Adminstrative Tools - Windows NT Diagnostics. Enter the Resources Tab and then click the Devices button to the bottom right. In the list of Devices that appear, double click the ParPort device. The IO address associated with the ISA bus is the OnBoard Parallel Port Address.


TROUBLESHOOTING

The LavaPort drivers will show messages in the Event Viewer regarding success or failure. If you are having trouble with the LavaPort go to Start - Programs - Administrative Tools - Event Viewer. Ensure that the System Log is enabled from the Log Menu. Write down any messages reported by the following services:
DetectLava,
SerialLava,
Serial,
and,
ParPort
Consult Lava's FAQs on our Web Site (www.lavalink.com) for relevant solutions. Or send email to [email protected].
Use of the LavaPort Control Applet:

USE OF LAVA CONTROL PANEL APPLET
1. The LavaPort Control Applet was written in a "Plug and Play" manner. It will attempt to install your card and attempt to show you any conflicts.
2. Information from LavaPort Control Applet installation is written to the System Log. Please refer here for more detailed information.
3. "Lava strongly recommends the use of the LavaPort Control Applet for use with your LavaPort-PCI product, for both installation and to make user-defined settings changes."
4. By clicking in Control Panel - LavaPorts you will find information on your LavaPort-PCI product. Double click it and you will see one of these possibilities:
* Just the icon, indicates NO CONFLICTS.
* Red "X" through the icon, indicates the hardware has been disabled. This can happen if you override the standard Com settings. Accessing the System Log will indicate the overlap in the Com Registers.
* Blue "!" exclamation point, indicates a System Conflict.
* Yellow "?" question mark, indicates a card not enumerated by the System (the conflict is unresolved).