Canon BJC-2130-2130C Download Drivers

Canon BJC-2130-2130C printer Driver Version 6.81
=====================================
CONTENTS
=====================================
Before You Get Started
1. Introduction
2. Product Contents
3. System Requirements

Printer Driver Canon BJC-2130-2130C installation
1. Installing the Printer Driver Canon BJC-2130-2130C
1-1 Using a Bidirectional Centronics Cable
1-2 Using a USB Cable
2. Deleting the Canon BJC-2130-2130C Printer Driver
2-1 When the Uninstaller Is Available
2-2 When the Uninstaller Is Unavailable
3. Accessing the Printer Properties Dialog Box
4. Principal Printer Setting Tabs
5. Precautionary Information
6. Restrictions Related to Application Software
7. About BJ Status Monitor
7-1 How to display the BJ Status Monitor
7-2 Precautionary Information

Microsoft Windows NT 4.0
Printer Driver Canon BJC-3000 Version 4.32
Instructions
=====================================
Introduction
=====================================

1. Foreword

This Readme gives you important information about setting up and using
the Canon BJC-2130-2130C printer Driver with which the Readme is distributed. The BJ
Printer Driver allows you to print on your Canon BJC-2130-2130C printer from
applications running under Microsoft (R) Windows NT (R) Version 4.0.
Before you can use your printer, you must install the printer driver on
your computer.

2. Installation Components Canon BJC-2130-2130C

The following components make up the installation package.

- Installer (Setup.exe)
Installs the Canon BJC-2130-2130C printer Driver on your computer.

- Canon BJC-2130-2130C printer Driver (referred to as the "printer driver" in this
document)
The software that allows you to print on your printer.

- Uninstaller
Lets you remove the printer driver from your computer.

- Readme (readme.txt)
This document. It contains important information about the printer
driver. To view it after installation, select [Start]-[Programs]-
[BJC-3000 (BJRSTR)]-[Readme].

- Guide (Guide.doc)
Instructions on using the printer driver. To view it after
installation, select [Start]-[Programs]-[BJC-3000 (BJRSTR)]-
[Guide].

3. System Requirements

This software requires the following system configuration:

Operating System
Windows NT Version 4.0 (English)

Minimum Hardware Requirements
Computer: Intel Pentium CPU with at least 16 MB RAM
Hard drive: At least 25 MB of free space
Additional drive: CD-ROM drive
Interface: Parallel interface
Printer cable: Bi-directional Centronics cable
Display: VGA display

Note:
This printer driver cannot be used to print on a print server from a
client machine running an operating system other than the above.

4. Installation Method