Epson Stylus Scan 2000 Download Drivers

Available 4 files for Stylus Scan 2000
Company
Epson
Categories
Printers
Model
Epson Stylus Scan 2000
Description
Drivers
Operating Systems
Windows 2000
Version Driver
v5.1cE
Size Driver
8.06Mb
File Name
ss2000p.exe
Company
Epson
Categories
Printers
Model
Epson Stylus Scan 2000
Description
Drivers
Operating Systems
Windows 95-98
Version Driver
v5.0CE
Size Driver
8.35Mb
File Name
ss2050ce.exe
Information
1. Introduction
2. Important legal information
3. Install notes
4. Q & A regarding printing
5. Application notes
6. Using EPSON Status Monitor 3

--------------------------------------------------------------------------------------------------------------------------
1. Introduction
Before calling technical support, be sure to read this README file, which includes solutions to printer driver and application-specific problems.

2. Important legal information
3. Install notes
When you're reinstalling the printer driver after deleting it, installing a printer driver for a second port, or installing the driver using plug and play, make sure to do the following
check that all print jobs have finished printing before you begin installation
close all applications
select "Replace existing driver" if prompted by the installation program.

4. Q & A regarding printing

Q: I can't seem to print correctly using the "Proportional Printing" or "Print Layout" options. Why?
A: Try setting print properties from the application's Print dialog box before printing; or setting print properties from control panel, then restart your application.
For example, to print from Microsoft Word 7.0 or Word 97 do the following:
1) From the File menu, select Print.
2) Click Properties.
3) Select the Paper menu.
4) Set the desired paper size.
5) Select the Layout menu.
6) For Proportional Printing, select Fit to Page, then select the desired paper size. After clicking OK, the Properties dialog box closes and the Print dialog box displays again.
7) Make any other selections in the Print dialog box, and click OK.

Q: I want to print a document using Proportional Printing but I am using more than one page size in the document. What should I do?
A: You can either divide the document into sections, each of which uses a single page size, or do the following:
1) Select File / Print / Properties or Setup
2) Select the Paper menu.
3) Select the paper size that corresponds to the largest paper size used in your document.
4) Select the Layout menu.
5) Select "Fit to Page", then select the paper size which you have loaded in the printer.
6) Select "Custom". All pages in your document are scaled to the largest page.

Q: After I changed print settings, the print output is not what I expected. Paragraph positioning is off, and text or graphics are missing. Why?
A: This problem can occur when settings for Print Quality, Proportional Printing or Print Layout have changed since the document was created. Try adjusting margins and font sizes. If your application has a print preview feature, use it before printing.

Q: When I print multiple copies of a document using the Print Layout feature, the same page prints twice. What do I do?
A: Make sure the copy count on the application's print menu to 1, and set the copy count on the printer driver's Paper menu.

Q: Thin lines don't print, or the print quality is poor. How can I correct them?
A: Use the Head Cleaning utility located on the Utility menu to verify that all the nozzles on the print head are firing. If this does not correct the problem, increase the thickness of the lines and try printing again.

Q: When I change the printer's name, the color of the print output changes slightly. Also, I get different results when I change printers.
A: Use the Printer and Option Information utility located on the Utility menu. (You should not need to do this if the printer's bi-directional communication is working.) Click on Settings Sheet and enter the numbers that print information in the Printer ID area. If "Settings Sheet" is grayed out, Epson Status Monitor 3 is running and the system enters the information automatically.
Q: When I install an EPSON Stylus High Quality ESC/P 2 printer driver and the Microsoft Windows Printing System at the same time, both printers stop working correctly.
A: For the printer you aren't going to be using, on the Details menu, set the "Print to the following port" to "FILE:" and try printing again.

Q: Upon changing the Paper Source, the Paper Size can not be set properly.
A: Please open the printer driver from the control panel and change the settings. Then restart your application.
For example, to select "Roll Paper", carry out the following steps:
1) Double click on the Printer Icon in the Control Panel folder.
2) Right click on the desired printer, and select "Properties".
3) Select the Paper menu.
4) Select "Roll Paper" from the Paper Source list.
5) Click on "OK". This will close the printer driver window.
6) Restart the application you wish to use.

The following method can be used so that it is not necessary to always change the settings in the control panel:

1) Re-Install the same printer as the one you wish to use. This will create a "(Copy - 2)" of the printer driver.
2) Set the Paper Source on the first driver to "Cut Sheet". (Using the method above)
3) Set the Paper Source on the (Copy - 2) driver to "Roll Sheet".
4) From the application select the printer driver which has the Paper Source
Company
Epson
Categories
Printers
Model
Epson Stylus Scan 2000
Description
Drivers
Operating Systems
Windows 2000
Language Driver
German
Version Driver
1.10
Size Driver
11.09Mb
File Name
ss2kw2kg.exe
Company
Epson
Categories
Printers
Model
Epson Stylus Scan 2000
Description
Drivers
Operating Systems
Windows 95-98
Language Driver
German
Version Driver
1.10
Size Driver
11.6Mb
File Name
ss2kw9g.exe
HelpDrivers Since March 2000