Hewlett Packard HP Color LaserJet CP4005n > Download Drivers, Utilities and Firmware

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_Reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

This download package contains HP Color LaserJet CP4005 Mac OS X Installer (Univeral Binary) files. Full printing support for Mac OS X v10.2, v10.3, v10.4 PPC and Intel processor, Mac is included with this download.

HP Marketing Resources software is a suite of tools that can help you produce professional-quality marketing material by using your own HP Color LaserJet product. Often, producing marketing material "in house" is faster and less expensive than sending the job to an external print-service provider.
Using these tools offers the following advantages:
Saves time – You control the schedule. You no longer need to drive to the print shop and wait for the job to be ready.
Saves money – By using your own HP product, you can avoid the setup charges that print shops often include. You are in complete control over the document, and you can decide which options to use.
This software supports Mac OS X v10.3.9 and v10.4.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_Reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

Marketing Resources software is a suite of tools that can help you produce professional-quality marketing material by using your own HP Color LaserJet product. Often, producing marketing material "in house" is faster and less expensive than sending the job to an external print-service provider.
Using these tools offers the following advantages:
Saves time – You control the schedule. You no longer need to drive to the print shop and wait for the job to be ready.
Saves money – By using your own HP product, you can avoid the setup charges that print shops often include. You are in complete control over the document, and you can decide which options to use.
This software supports Mac OS X v10.3.x, v10.4.x and v10.5.x

This download package contains HP Color LaserJet CP4005 Mac OS X Installer (Univeral Binary) files. Full printing support for Mac OS X v10.2, v10.3, v10.4 PPC and Intel processor, Mac is included with this download.

This download package contains HP LaserJet Mac OS X Installer with Printer Utility Software Solution v7.8.0.761. Included are the HP Mac driver files (v4.3.1) and HP Printer Utility for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP Color LaserJet 3000
HP Color LaserJet 3800
HP Color LaserJet 4700
HP Color LaserJet 4730mfp
HP Color LaserJet CP4005
HP Color LaserJet CP6015
HP LaserJet P3004
HP LaserJet P3005
HP LaserJet 5200
HP LaserJet 5200L
HP LaserJet M3027 mfp
HP LaserJet M3035 mfp
HP LaserJet M4345 mfp
HP LaserJet M5025 mfp
HP LaserJet M5035 mfp

The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP Color LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.

What is included in a Remote Firmware Update (RFU)?
The HP Color LaserJet Printer Remote Firmware contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP Color LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
Similar to Hewlett Packard providing improved software for your HP Color LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20080307 46.034.1

The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.
This document provides specific update, installation and troubleshooting information.
What is included in a Remote Firmware Update (RFU)?
The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20051204 46.029.3

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_Reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information. For additional information on the printer features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE of this document
This document provides specific installation instructions and other information you should know before you install and use the printing system. The installation instructions are for the following operating systems:
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Macintosh 10.2 and later

Who needs this software?
All users require this printing-system software. Network clients need the installation CD or the name of the appropriate network directory to install the software on their individual workstations.
Overview of the printing-system components
The CD that is included with the printers has software for IBM-compatible computer systems and Apple Macintosh (and Apple-compatible) systems.
Network administrator software components
HP Web Jetadmin
Network administrators can use HP Web Jetadmin to configure and manage HP printers across a variety of operating systems.
NOTE: HP Web Jetadmin is not included on the software CD.

HP Printer Utility for Macintosh OS
Network administrators can use the HP Printer Utility for Macintosh OS X V10.2 and above to configure and manage HP printers from the computer. The printing-system software CD-ROM includes Adobe PPD files for the Macintosh printer driver.
Installer Customization Wizard
The printing-system software CD includes the Installer Customization Wizard as one of the installer options. Network administrators can use this utility to create a custom printer-driver installation package that includes organization-specific components. Upon completion, the customization utility produces an executable file (*.EXE). Use the file to install the preconfigured printer drivers on client machines. This utility supports silent, batch operations.
HP Driver Preconfiguration
HP Driver Preconfiguration is a set of tools that allows HP software to be customized and distributed in managed printing environments. Using HP Driver Preconfiguration, administrators can preconfigure the printing and device defaults for HP printer drivers before installing the drivers in the network environment. The HP Preconfiguration solution is also a component of the Installer Customization Wizard and a plug-in for Web Jetadmin.
Most printer-driver-feature settings can be preconfigured, and several of the features can be locked to prevent end-users from changing settings. The following printer-driver features can be locked:
Print on Both Sides (Duplex)
Print in Grayscale
Media Type
Paper Source
Output Bin
HP Driver Preconfiguration is supported for all the PCL5, PCL6, and PostScript drivers in Windows 2000, Windows XP, Windows Server 2003, and Windows Vista.
Driver Autoconfiguration
The HP Color LaserJet PCL 6, PCL 5c, and PostScript drivers for Windows 2000, Windows XP, and Windows Vista feature automatic discovery and driver configuration for printer accessories at the time of installation. Some accessories that Driver Autoconfiguration supports are the duplexing unit, optional paper trays, and memory modules.
Update Now
If you have modified the configuration of the HP Color LaserJet CP4005 printer since installation, the driver can be automatically updated with the new configuration in environments that support bidirectional communication. Click the Update Now button to automatically reflect the new configuration in the driver.
NOTE: The Update Now feature is not supported in environments where shared Windows 2000 or Windows XP clients are connected to Windows 2000, Windows XP, or Windows Vista hosts.
End-user software components

Printer drivers
A printer driver is a software program that other software programs use to gain access to the printer features. Typically, you install a printer driver for each printer. The printing-system software CD that came with your printer includes the following printer drivers, all of which have similar graphical user interfaces:
Windows 2000
Windows XP
Windows Server 2003
Macintosh OS

Adobe Acrobat Reader
.

Uninstall
Use the uninstall utility to select and remove any or all of the Windows HP printing-system components.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_Reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

PURPOSE OF THIS README FILE
This Readme file provides specific installation instructions and other information you should know before you perform a custom color table upgrade for your Color LaserJet printer. Installation instructions are provided for Windows and Macintosh systems.
This file provides specific installation and troubleshooting information.
WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE
cp4005_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
cp####_{what}_{ver}.rfu
Where:
cp#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie.
clj4700_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4700 version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions
To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section.

Purpose of this document
This document provides specific installation instructions and other information you should know before you install and use the printing system. The installation instructions are for the following operating systems:
Windows 2000
Windows XP 32/64 bit
Windows Server 2003 32/64 bit
Windows Vista 32/64 bit
Macintosh 10.2 and later

Who needs this software?
All users require this printing-system software.
Overview of the printing-system components

Network administrator software components
HP Web Jetadmin
Network administrators can use HP Web Jetadmin to configure and manage HP printers across a variety of operating systems.
HP Printer Utility for Macintosh OS

HP Driver Preconfiguration
HP Driver Preconfiguration is a set of tools that allows HP software to be customized and distributed in managed printing environments. Using HP Driver Preconfiguration, administrators can preconfigure the printing and device defaults for HP printer drivers before installing the drivers in the network environment. The HP Preconfiguration solution is also a component of the and a plug-in for Web Jetadmin.
Most printer-driver-feature settings can be preconfigured, and several of the features can be locked to prevent end-users from changing settings. The following printer-driver features can be locked:
Print on Both Sides (Duplex)
Print in Grayscale
Media Type
Paper Source
Output Bin
HP Driver Preconfiguration is supported for all the PCL5, PCL6, and PostScript drivers in Windows 2000, Windows XP, Windows Server 2003, and Windows Vista.
Driver Autoconfiguration
The HP Color LaserJet PCL 6, PCL 5c, and PostScript drivers for Windows 2000, Windows XP, and Windows Vista feature automatic discovery and driver configuration for printer accessories at the time of installation. Some accessories that Driver Autoconfiguration supports are the duplexing unit, optional paper trays, and memory modules.
Update Now
If you have modified the configuration of the HP Color LaserJet CP4005 printer since installation, the driver can be automatically updated with the new configuration in environments that support bidirectional communication. Click the Update Now button to automatically reflect the new configuration in the driver.
NOTE: The Update Now feature is not supported in environments where shared Windows 2000 or Windows XP clients are connected to Windows 2000, Windows XP, or Windows Vista hosts.

Purpose of this document
This document provides specific installation instructions and other information you should know before you install and use the printing system. The installation instructions are for the following operating systems:
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Macintosh 10.2 and later

Who needs this software?
All users require this printing-system software.
Overview of the printing-system components

Network administrator software components
HP Web Jetadmin
Network administrators can use HP Web Jetadmin to configure and manage HP printers across a variety of operating systems.
HP Printer Utility for Macintosh OS

HP Driver Preconfiguration
HP Driver Preconfiguration is a set of tools that allows HP software to be customized and distributed in managed printing environments. Using HP Driver Preconfiguration, administrators can preconfigure the printing and device defaults for HP printer drivers before installing the drivers in the network environment. The HP Preconfiguration solution is also a component of the and a plug-in for Web Jetadmin.
Most printer-driver-feature settings can be preconfigured, and several of the features can be locked to prevent end-users from changing settings. The following printer-driver features can be locked:
Print on Both Sides (Duplex)
Print in Grayscale
Media Type
Paper Source
Output Bin
HP Driver Preconfiguration is supported for all the PCL5, PCL6, and PostScript drivers in Windows 2000, Windows XP, Windows Server 2003, and Windows Vista.
Driver Autoconfiguration
The HP Color LaserJet PCL 6, PCL 5c, and PostScript drivers for Windows 2000, Windows XP, and Windows Vista feature automatic discovery and driver configuration for printer accessories at the time of installation. Some accessories that Driver Autoconfiguration supports are the duplexing unit, optional paper trays, and memory modules.
Update Now
If you have modified the configuration of the HP Color LaserJet CP4005 printer since installation, the driver can be automatically updated with the new configuration in environments that support bidirectional communication. Click the Update Now button to automatically reflect the new configuration in the driver.
NOTE: The Update Now feature is not supported in environments where shared Windows 2000 or Windows XP clients are connected to Windows 2000, Windows XP, or Windows Vista hosts.

Uninstall
Use the uninstall utility to select and remove any or all of the Windows HP printing-system components.

The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP Color LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.

What is included in a Remote Firmware Update (RFU)?
The HP Color LaserJet Printer Remote Firmware contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP Color LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
Similar to Hewlett Packard providing improved software for your HP Color LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20080307 46.034.1

The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.
This document provides specific update, installation and troubleshooting information.
What is included in a Remote Firmware Update (RFU)?
The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20051204 46.029.3

PURPOSE of this document
This document provides specific installation instructions and other information you should know before you install and use the printing system. The installation instructions are for the following operating systems:
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Macintosh 10.2 and later

Who needs this software?
All users require this printing-system software. Network clients need the installation CD or the name of the appropriate network directory to install the software on their individual workstations.
Overview of the printing-system components
The CD that is included with the printers has software for IBM-compatible computer systems and Apple Macintosh (and Apple-compatible) systems.
Network administrator software components
HP Web Jetadmin
Network administrators can use HP Web Jetadmin to configure and manage HP printers across a variety of operating systems.
NOTE: HP Web Jetadmin is not included on the software CD.

HP Printer Utility for Macintosh OS
Network administrators can use the HP Printer Utility for Macintosh OS X V10.2 and above to configure and manage HP printers from the computer. The printing-system software CD-ROM includes Adobe PPD files for the Macintosh printer driver.
Installer Customization Wizard
The printing-system software CD includes the Installer Customization Wizard as one of the installer options. Network administrators can use this utility to create a custom printer-driver installation package that includes organization-specific components. Upon completion, the customization utility produces an executable file (*.EXE). Use the file to install the preconfigured printer drivers on client machines. This utility supports silent, batch operations.
HP Driver Preconfiguration
HP Driver Preconfiguration is a set of tools that allows HP software to be customized and distributed in managed printing environments. Using HP Driver Preconfiguration, administrators can preconfigure the printing and device defaults for HP printer drivers before installing the drivers in the network environment. The HP Preconfiguration solution is also a component of the Installer Customization Wizard and a plug-in for Web Jetadmin.
Most printer-driver-feature settings can be preconfigured, and several of the features can be locked to prevent end-users from changing settings. The following printer-driver features can be locked:
Print on Both Sides (Duplex)
Print in Grayscale
Media Type
Paper Source
Output Bin
HP Driver Preconfiguration is supported for all the PCL5, PCL6, and PostScript drivers in Windows 2000, Windows XP, Windows Server 2003, and Windows Vista.
Driver Autoconfiguration
The HP Color LaserJet PCL 6, PCL 5c, and PostScript drivers for Windows 2000, Windows XP, and Windows Vista feature automatic discovery and driver configuration for printer accessories at the time of installation. Some accessories that Driver Autoconfiguration supports are the duplexing unit, optional paper trays, and memory modules.
Update Now
If you have modified the configuration of the HP Color LaserJet CP4005 printer since installation, the driver can be automatically updated with the new configuration in environments that support bidirectional communication. Click the Update Now button to automatically reflect the new configuration in the driver.
NOTE: The Update Now feature is not supported in environments where shared Windows 2000 or Windows XP clients are connected to Windows 2000, Windows XP, or Windows Vista hosts.
End-user software components

Printer drivers
A printer driver is a software program that other software programs use to gain access to the printer features. Typically, you install a printer driver for each printer. The printing-system software CD that came with your printer includes the following printer drivers, all of which have similar graphical user interfaces:
Windows 2000
Windows XP
Windows Server 2003
Macintosh OS

Adobe Acrobat Reader
.

Uninstall
Use the uninstall utility to select and remove any or all of the Windows HP printing-system components.

This Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000

This file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This is a monochrome driver. It is for printing in black and white without grayscale.
The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
This file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
This file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

Windows Vista
Windows XP
Windows Server 2003
Windows 2000

This file provides specific compatibility, and troubleshooting information.

Windows Vista
Windows XP
Windows Server 2003
Windows 2000
This file provides specific compatibility, and troubleshooting information.

Windows Vista
Windows XP
Windows Server 2003
Windows 2000
This file provides specific compatibility, and troubleshooting information.

The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

This is a monochrome driver. It is for printing in black and white without grayscale.

Windows Vista
Windows XP
Windows Server 2003
Windows 2000

Windows Vista 64-bit
Windows XP 64-bit
Windows Server 2003 64-bit

This file provides specific compatibility, and troubleshooting information.

Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition

This is a monochrome driver. It is for printing in black and white without grayscale.

Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition

The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition

The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

This Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista 64-bit
Windows XP 64-bit
Windows Server 2003 64-bit

This file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This is a monochrome driver. It is for printing in black and white without grayscale.
The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

HP Marketing Resources software is a suite of tools that can help you produce professional-quality marketing material by using your own HP Color LaserJet product. Often, producing marketing material "in house" is faster and less expensive than sending the job to an external print-service provider.
Using these tools offers the following advantages:
Saves time – You control the schedule. You no longer need to drive to the print shop and wait for the job to be ready.
Saves money – By using your own HP product, you can avoid the setup charges that print shops often include. You are in complete control over the document, and you can decide which options to use.

HP Marketing Resources software is a suite of tools that can help you produce professional-quality marketing material by using your own HP Color LaserJet product. Often, producing marketing material "in house" is faster and less expensive than sending the job to an external print-service provider.
Using these tools offers the following advantages:
Saves time – You control the schedule. You no longer need to drive to the print shop and wait for the job to be ready.
Saves money – By using your own HP product, you can avoid the setup charges that print shops often include. You are in complete control over the document, and you can decide which options to use.