Available 9 files for Kyocera Ai3010

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

TCP/IP Peer to Peer Utility

Size Driver

748KB

File Name

2310ipenup2p.exe

Observations

This disk contains the Microsoft Windows 95/98 and Microsoft Windows
NT 4.0 compatible software to allow PC's running these systems to print
directly to the compatible network card in your printer using the IP
capabilities that are supplied with Microsoft Windows 95/98 and Microsoft
Windows NT 4.0. This capability will work even if there is no Novell
NetWare File Server on the net; however, your PC must have the TCP/IP
protocol installed within its Network Configuration.

This program has been developed and tested using Microsoft network protocol
stacks supplied with Windows 95/98 and Windows NT 4.0. Operation in conjunction
with third party network stacks is not guaranteed.

========================================================================

To install the IP Peer-to-Peer capability, run the SETUP program on this disk.
A *.dll file will be entered into the active Windows system directory.

If you change the IP Peer-to-Peer Printer naming scheme, you must then run
the IP-P2P program from the Programs menu. Click on the Printers button
then click on the Find Printers option.

If you add printers to your network, you must Refresh the list again.

How to Add an IP P2P Printer.

1. Open the Printers window from within the Settings... menu in the
Start Menu.
2. Start the Add Printer Wizard by selecting Add Printer.
3. Step through the Add Printer procedure.
4. Select 'Local printer' when the Add Printer Wizard asks you to choose
between local or network printers.
5. Select your printer's make and model as normal.
6. Your P2P network printers will be listed as local printer ports.
7. Select the desired P2P printer by IP Address.
8. Complete the rest of Add Printer as normal.

========================================================================

To remove the IP Peer-to-Peer capability software from your PC, use the
Install/Uninstall Programs feature in the Control Panel of your Operating
System.

How to Remove the IP P2P software.

1. Open the Printers window from within the Settings... menu in the
Start Menu.
2. Delete all of the printers you have created which are P2P printers
Or switch each port to LPT1: using the Properties tab.
3. Run Add/Remove Programs from the Windows Control Panel.
4. Select P2P-IP to remove.

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

Novel TCP/IP Configurator.

Size Driver

1.4MB

File Name

2310nvlenuipcfg.exe

Observations

This CD-ROM contains IP/IPX MAP software which is an administrative tool. It
generates a list of compatible network printers which is displayed using the
default browser installed on the PC. The network adminstrator can use URL links
in the page to access the printer's HTML configuration menus.

To use this software package, your PC must have the Microsoft TCP/IP compatible
protocol(s) installed in the Network Configuration. This program has been
developed and tested using Microsoft network protocol stacks supplied with
Windows 95/98 and Windows NT 4.0. Operation in conjunction with third party
network stacks is not guaranteed.

The IP communication is via a TCP port. The port number used by this utility must
be the same as the TCP port number used by the printer. The printer port number
is identified on the configuration sheet from the printer and may be changed
using the setup capabilities for the printer NIC.

The IPX communication uses the IPX capabilities that are supplied with Microsoft
Windows 95/98 and Microsoft Windows NT 4.0 or Novell Client 32. To use this
capability, your PC must have the Microsoft IPX/SPX compatible protocol(s)
installed in the Network Configuration. This capability will work even if there
is no Novell NetWare file server on the network.

To use the MAP software, your PC must also have a web browser installed. If more
than one browser is installed, the MAP software will automatically use the one
setup as the default browser. The MAP software has been tested with Microsoft
Internet Explorer, Netscape Navigator, and Netscape Communicator. Compatibility
with other browsers is not guaranteed.

To install the software, run [drive]:\MAP\Setup.exe program on this CD-ROM. The
software will be installed to a directory of your choice.
To remove the software from your PC, run the Add/Remove Programs facility inside
the Windows Control Panel.

Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT, and Microsoft
Internet Explorer are registered trademarks of Microsoft Corporation. Netscape
Navigator and Netscape Communicator are registered trademarks of Netscape
Corporation.
MAP has the following requirements:

1. The Microsoft TCP/IP protocol stack must be installed on this PC. It is not
necessary for the network to support TCP/IP. However, the TCP/IP protocol must
be installed on this PC even if the network does not support it.

2. A web browser must be installed on this PC. Both Netscape Navigator and
Internet Explorer are supported.

3. If the IPX search functions are to be used, then IPX must be installed on
this PC. Both the Microsoft and the NetWare 32-bit stacks are supported.

4. MAP uses PORT 34 as an HTTP Server Port for the IPX to IP Gateway. If the IPX
serach functions are to be used, then there may be no other functions or programs
utilizing PORT 34.

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

MAP IPX/SPX Printing Port Configurator

Size Driver

1.1MB

File Name

2310ipxenuipcfg.exe

Observations

This CD-ROM contains IP/IPX MAP software which is an administrative tool. It
generates a list of compatible network printers which is displayed using the
default browser installed on the PC. The network adminstrator can use URL links
in the page to access the printer's HTML configuration menus.

To use this software package, your PC must have the Microsoft TCP/IP compatible
protocol(s) installed in the Network Configuration. This program has been
developed and tested using Microsoft network protocol stacks supplied with
Windows 95/98 and Windows NT 4.0. Operation in conjunction with third party
network stacks is not guaranteed.

The IP communication is via a TCP port. The port number used by this utility must
be the same as the TCP port number used by the printer. The printer port number
is identified on the configuration sheet from the printer and may be changed
using the setup capabilities for the printer NIC.

The IPX communication uses the IPX capabilities that are supplied with Microsoft
Windows 95/98 and Microsoft Windows NT 4.0 or Novell Client 32. To use this
capability, your PC must have the Microsoft IPX/SPX compatible protocol(s)
installed in the Network Configuration. This capability will work even if there
is no Novell NetWare file server on the network.

To use the MAP software, your PC must also have a web browser installed. If more
than one browser is installed, the MAP software will automatically use the one
setup as the default browser. The MAP software has been tested with Microsoft
Internet Explorer, Netscape Navigator, and Netscape Communicator. Compatibility
with other browsers is not guaranteed.

To install the software, run [drive]:\MAP\Setup.exe program on this CD-ROM. The
software will be installed to a directory of your choice.
To remove the software from your PC, run the Add/Remove Programs facility inside
the Windows Control Panel.

Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT, and Microsoft
Internet Explorer are registered trademarks of Microsoft Corporation. Netscape
Navigator and Netscape Communicator are registered trademarks of Netscape
Corporation.
MAP has the following requirements:

1. The Microsoft TCP/IP protocol stack must be installed on this PC. It is not
necessary for the network to support TCP/IP. However, the TCP/IP protocol must
be installed on this PC even if the network does not support it.

2. A web browser must be installed on this PC. Both Netscape Navigator and
Internet Explorer are supported.

3. If the IPX search functions are to be used, then IPX must be installed on
this PC. Both the Microsoft and the NetWare 32-bit stacks are supported.

4. MAP uses PORT 34 as an HTTP Server Port for the IPX to IP Gateway. If the IPX
serach functions are to be used, then there may be no other functions or programs
utilizing PORT 34.

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

Mac PPD

Operating System

MAC OS 8x-9x

Version

1.20

Size Driver

5KB

File Name

m3a0.ppd.sit

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

Windows PPD for Adobe PageMaker

Operating System

MAC OS 8x-9x

Version

1.20

Size Driver

33KB

File Name

pmps.exe

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

PLC

Operating System

Windows 2000

Version

1.00

Size Driver

634KB

File Name

2310enmini2kr100.exe

Observations

1. Description
This application is a printer driver for Microsoft(R) Windows(TM) 2000.

2. Requirements
Software: Microsoft Windows 2000
Hardware: A true IBM PC/AT compatible computer
Minimum 133 MHz Pentium processor recommended
64 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010

3. Installation
To install this printer driver, please follow the instructions below:

From Add Printer
1) Start Windows.
2) Click the Start button, point to Settings, and then click
Printers.
3) Double-click Add Printer.
4) Follow the instructions on the screen.
5) When the driver files are required, please select "OEMPRINT.INF" file from
its printer driver folder.
6) When the "Digital Signature" screen appears during installation, please select "Yes"
and continue installing.
7) 2310/3010(PCL) printer as default printer.

If there are any optional devices (Paper Feeder,Output Device ) attached to your printer
or if you have extended the printer memory, please follow the next directions after
installing the printer driver.
8) Click "2310/3010(PCL)" icon with the right mouse button,
and click "Properties".
9) Set optional devices under "Installable Options".
10) Click "OK" or "Apply" and the setting willl become effective.

NOTE:
Please execute following operations to upgrade printer driver from old one to new one.
1.Before installing new driver, please remove old driver,
and restart the PC.
2.Please refer to "4. Uninstall" when removing the old driver.
3.We recommend you to restart your PC after removing the old driver.
(The driver file may not be completely removed from your PC.)

4. Uninstall
To uninstall this driver, please follow the instructions below:
1) Click the Start button, point to "Settings", and then click "Printers".
Click "2310/3010(PCL)" icon with the right mouse button,
and click "Delete".
2) Follow the instructions on the screen.
3) Next, remove the unnecessary Driver File (Driver File:3a0pcl.dll, 3a0pclua.gpd)
from your PC.
Click "File" button, and point "Server Properties".
Click "Driver" Tab in the display.
Select "2310/3010(PCL)", and then point "Remove".


5. Notes and restrictions

Notes
1) If you print a job using the Sort mode on this printer,
do not select Collate option in the Print dialog box of
the application software.

2) If you want to print a job using the Sort mode,
open the Printer Driver screen and click "Advanced" button.
"Collated" will appear if you set Copy Count at "2" or more but this does not
mean that Sort mode is ready.
For this printer, please select "On" under "Collate at Printer" in the same screen.

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

PLC

Operating System

Windows 3.x

Version

1.10

Size Driver

898KB

File Name

2310enmini3xr110.exe

Observations

1. Description
This application are PCL5e / PCL6 printer driver
for Microsoft(R) Windows(TM) 3.1x.

2. Requirements
Software: Microsoft Windows 3.1x
Hardware: A true IBM PC/AT compatible computer
Minimum 90 MHz Pentium processor recommended
32 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010

3. Installation
Before printing on this printer, you should install
this printer driver software.
Please look at the Instraction Hand book.

4. Uninstall
Remove the printer driver before starting print jobs.
If you remove it after printing, all files of the printer driver might
not be able to be deleted.
Please look at the Instraction Hand book.

5. Notes
1) If you print a job using the Group mode or Sort mode on
this printer, do not select Collate option in the Print
dialog box of the application software.

2) When printer error occurs, please cancel the print job by
pushing "Cancel Job" on printer display at the machine.
If you canceled your print job from your PC, be sure to
operate "reset" at printer display at the machine.

3) When using layout function with custom size paper,sometimes
will not print correctly.

4) If your PC is using ECP printer port, sometimes WinPanel
will not operate correctly. When WinPanel doesn't operate
correctly, change your PC setting to printer port.

5) When HDD is not installed, and there are not enough memory,
finisher may not recover jam correctly.

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

PCL5e, PCL6, and PostScript Print Driver

Operating System

Windows 95-98

Version

1.20

Size Driver

856KB

File Name

2310enmini9xr120.exe

Observations

1. Description
This application are PCL5e / PCL6 / PS printer driver
for Microsoft(R) Windows(TM) 95/98.

2. Requirements
Software: Microsoft Windows 95/98
Hardware: A true IBM PC/AT compatible computer
Minimum 90 MHz Pentium processor recommended
32 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010

3. Installation
There are two way to install these driver.
Before printing on this printer, you should install
this printer driver software.
(A)From Add Printer
1) Start Windows and insert CD-ROM into the appropriate
drive.
2) Click the Start button, point to Settings, and then click
Printers.
3) Double-click Add Printer.
4) Follow the instructions on the screen.
5) When you are required the driver files, you select
":\Disks\English\95setup".
6) Set 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS
printer as default printer.

(B)From install.exe
Please look at the Instraction Hand book.

4. Uninstall
There are two way to uninstall these driver.
Remove the printer driver before starting print jobs.
If you remove it after printing, all files of the printer driver might
not be able to be deleted.
--In case you install by method (A)--
1) Click the Start button, point to Settings, and then click
Printers.
Click 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS icon
with the right mouse button, and click Delete.
2) Follow the instructions on the screen.
--In case you install by method (B)--
Please look at the Instraction Hand book.

5. Notes
1) If you print a job using the Group mode or Sort mode on
this printer, do not select Collate option in the Print
dialog box of the application software.

2) When using layout function with custom size paper,sometimes
will not print correctly.

3) If your PC is using ECP printer port, sometimes WinPanel
will not operate correctly. When WinPanel doesn't operate
correctly, change your PC setting to printer port.

4) When HDD is not installed, and there are not enough memory,
finisher may not recover jam correctly.

5) Printer function settings are not available in printing with
PS driver in Adobe Pagemaker.
Follow the procedure below to use function settings.
1.Copy \Disks\English\Pmppd\Pmps.ppd from
CD-ROM(Ver1.20 or later) to the folder Pagemaker
is installed in.
(Ex.As for Ver6.5, C:\Pm65\Rsrc\**English\Ppd4\..)

Company

Kyocera

Categories

Printers

Serie

Kyocera Ai Series

Model

Kyocera Ai3010

Description

PCL5e, PCL6, and PostScript Print Driver

Operating System

Windows NT

Version

1.10

Size Driver

782KB

File Name

2310enminintr110.exe

Observations

1. Description
This application are PCL5e / PCL6 / PS printer driver
for Microsoft(R) Windows(TM) NT4.0.

2. Requirements
Software: Microsoft Windows NT4.0
Hardware: A true IBM PC/AT compatible computer
Minimum 90 MHz Pentium processor recommended
32 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010

3. Installation
There are two way to install these driver.
Before printing on this printer, you should install
this printer driver software.
(A)From Add Printer
1) Start Windows and insert CD-ROM into the appropriate
drive.
2) Click the Start button, point to Settings, and then click
Printers.
3) Double-click Add Printer.
4) Follow the instructions on the screen.
5) When you are required the driver files, you select
":\Disks\English\Ntsetup".
6) Set 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS
printer as default printer.

(B)From install.exe
Please look at the Instraction Hand book.

4. Uninstall
There are two way to uninstall these driver.
Remove the printer driver before starting print jobs.
If you remove it after printing, all files of the printer driver might
not be able to be deleted.
--In case you install by method (A)--
1) Click the Start button, point to Settings, and then click
Printers.
Click 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS icon
with the right mouse button, and click Delete.
2) Follow the instructions on the screen.
--In case you install by method (B)--
Please look at the Instraction Hand book.

5. Notes
1) If you print a job using the Group mode or Sort mode on
this printer, do not select Collate option in the Print
dialog box of the application software.

2) When using layout function with custom size paper,sometimes
will not print correctly.

3) If your PC is using ECP printer port, sometimes WinPanel
will not operate correctly. When WinPanel doesn't operate
correctly, change your PC setting to printer port.

4) When HDD is not installed, and there are not enough memory,
finisher may not recover jam correctly.

5) Printer function settings are not available in printing with
PS driver in Adobe Pagemaker.
Follow the procedure below to use function settings.
1.Copy \Disks\English\Pmppd\Pmps.ppd from
CD-ROM(Ver1.20 or later) to the folder Pagemaker
is installed in.
(Ex.As for Ver6.5, C:\Pm65\Rsrc\**English\Ppd4\..)