Artec AT3E Download Drivers

The following is the important information of Artec AT3E installation driver.

• Click on Download Now and a File Download box will appear.
  Select Save This Program to Disk and a Save As box will appear.
  Select a directory to save the driver in and click Save.
  Locate the driver file using Windows Explorer when the download has completed.
  
  
• Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the AT3E model that was downloaded (for example c:\AT3E). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.
  
  
• Before starting the installation of drivers, connect your scanner Artec AT3E to your computer, and that the scanner is powered On. See your printer manual for details.
  
  
• Remove any previus Artec AT3E driver from Windows control panel and reboot the system.
  
  
• Windows now detects Artec AT3E and searchs for a driver: you must stop any request and hit on "Cancel button".
  
  
• Double click on Setup.exe (or similar file xxx.exe) located in c:\AT3E folder
  
  
• Follow the on screen istructions
  
  
• If during installation in Windows, you will be prompted with a message warning that the driver software for AT3E has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Artec, and safe to use.
  
  
• Reboot the system
  
  
• Congratulations, the drivers for scanner Artec AT3E is installed.
  
  
• Search and consult the Readme file for additional installation drivers instructions for your scanner AT3E.