Available 180 files for Hewlett Packard HP OfficeJet g95 All-in-One
Select Files
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS 9-Mac OS X
Version
7.3.1
Language Driver
Chinese Hong Kong
Size Driver
59.9MB
File Name
g_731_en.smi.hqx
Observations
HP Officejet G Series All-in-One software for Mac OS 9.x and Mac OS X v10.1.x
Operating system(s): Mac OS 9, Mac OS X
Download file size: 59.9M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS X
Version
7.3.1
Language Driver
Chinese Hong Kong
Size Driver
62.8MB
File Name
g_731_en.dmg
Observations
HP Officejet G Series All-in-One software for Mac OS X v10.2.8, v10.3 and v10.4
Operating system(s): Mac OS X
Download file size: 62.83M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Chinese Hong Kong
Size Driver
71.7MB
File Name
a140609_cht_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.74M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Chinese Hong Kong
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Chinese Hong Kong
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
SOAR-TW-UST-13833
Operating System
Windows 2000-XP
Version
1
Language Driver
Chinese Hong Kong
Size Driver
429.4MB
File Name
c6737-10007.exe
Observations
SOAR-TW-UST-13833
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 429.49M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Chinese Hong Kong
Size Driver
38.9MB
File Name
g95win95tc.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 38.93M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Chinese Hong Kong
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Chinese Hong Kong
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Chinese Hong Kong
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95-98-Me-NT4-2000
Version
2.43
Language Driver
Chinese Hong Kong
Size Driver
208.3MB
File Name
hpowbi07g85-95.exe
Observations
HP OfficeJet G85/95
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 208.35M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
Chinese Hong Kong
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Chinese Hong Kong
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Chinese Hong Kong
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Chinese Hong Kong
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Chinese Hong Kong
Size Driver
32.1MB
File Name
g95nttc.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.19M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Chinese Hong Kong
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Chinese Hong Kong
Size Driver
71.6MB
File Name
a140609_cht_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.69M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.00
Language Driver
Chinese Hong Kong
Size Driver
69.4MB
File Name
a1406_04_cht_xp.exe
Observations
Driver includes all the same software as CD part number C6737-10003, version 3.00 (software version A.14.06.04), with the following components not-included to reduce download time; PrintCreator; Product Tour; ReadIris application; and Share2Web.
Operating system(s): Microsoft Windows XP
Download file size: 69.42M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Network Ready Software and Driver
Operating System
Windows XP
Version
3.00
Language Driver
Chinese Hong Kong
Size Driver
71.6MB
File Name
a1406_04_cht_xp-network.exe
Observations
Driver includes all the same software as CD part number C6737-10003, version 3.00 (software version A.14.06.04), with the following components not-included to reduce download time; PrintCreator; Product Tour; ReadIris application; and Share2Web.
Operating system(s): Microsoft Windows XP
Download file size: 71.61M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Chinese Simplified
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Chinese Traditional
Size Driver
71.7MB
File Name
a140609_cht_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.74M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Chinese Traditional
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Chinese Traditional
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
SOAR-TW-UST-13833
Operating System
Windows 2000-XP
Version
1
Language Driver
Chinese Traditional
Size Driver
429.4MB
File Name
c6737-10007.exe
Observations
SOAR-TW-UST-13833
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 429.49M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Chinese Traditional
Size Driver
38.9MB
File Name
g95win95tc.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 38.93M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Chinese Traditional
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Chinese Traditional
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Chinese Traditional
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95-98-Me-NT4-2000
Version
2.43
Language Driver
Chinese Traditional
Size Driver
208.3MB
File Name
hpowbi07g85-95.exe
Observations
HP OfficeJet G85/95
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 208.35M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
Chinese Traditional
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Chinese Traditional
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Chinese Traditional
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Chinese Traditional
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Chinese Traditional
Size Driver
32.1MB
File Name
g95nttc.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.19M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Chinese Traditional
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Chinese Traditional
Size Driver
71.6MB
File Name
a140609_cht_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.69M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.00
Language Driver
Chinese Traditional
Size Driver
69.4MB
File Name
a1406_04_cht_xp.exe
Observations
Driver includes all the same software as CD part number C6737-10003, version 3.00 (software version A.14.06.04), with the following components not-included to reduce download time; PrintCreator; Product Tour; ReadIris application; and Share2Web.
Operating system(s): Microsoft Windows XP
Download file size: 69.42M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Network Ready Software and Driver
Operating System
Windows XP
Version
3.00
Language Driver
Chinese Traditional
Size Driver
71.6MB
File Name
a1406_04_cht_xp-network.exe
Observations
Driver includes all the same software as CD part number C6737-10003, version 3.00 (software version A.14.06.04), with the following components not-included to reduce download time; PrintCreator; Product Tour; ReadIris application; and Share2Web.
Operating system(s): Microsoft Windows XP
Download file size: 71.61M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Dutch
Size Driver
71.6MB
File Name
a140609_nld_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.7M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Dutch
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Dutch
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Dutch
Size Driver
34.1MB
File Name
g95win95du.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.19M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Dutch
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Dutch
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Dutch
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
Dutch
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Dutch
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Dutch
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Dutch
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Dutch
Size Driver
33MB
File Name
g95ntdu.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 33.04M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Dutch
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Dutch
Size Driver
71.6MB
File Name
a140609_nld_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.64M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS 9-Mac OS X
Version
7.3.1
Language Driver
English American
Size Driver
59.9MB
File Name
g_731_en.smi.hqx
Observations
HP Officejet G Series All-in-One software for Mac OS 9.x and Mac OS X v10.1.x
Operating system(s): Mac OS 9, Mac OS X
Download file size: 59.9M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS X
Version
7.3.1
Language Driver
English American
Size Driver
62.8MB
File Name
g_731_en.dmg
Observations
HP Officejet G Series All-in-One software for Mac OS X v10.2.8, v10.3 and v10.4
Operating system(s): Mac OS X
Download file size: 62.83M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
English American
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
English American
Size Driver
64.1MB
File Name
a140609_enu_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 64.17M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
English American
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
English American
Size Driver
30.9MB
File Name
g95win95en.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 30.94M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
English American
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
English American
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
AOL Version 8 Update
Operating System
Windows 95-98-Me
Version
1.0.0.3
Language Driver
English American
Size Driver
40KB
File Name
hpoaol07.exe
Observations
HP OfficeJet G Series Software AOL 8 Fix for Windows 95, 98, 98SE, and ME:
This utility has the following additional requirements:
It will only operate correctly under Windows 95, 98, 98 SE, and ME.
It will NOT work on Windows 2000, XP Home, or XP Professional, or the Macintosh OS's.
This patch will only work with hp officejet G series drivers:
version 2.43 (except Korean or Traditional Chinese)
version 2.50
This patch will NOT work on the drivers version 3.00 or newer.
INSTALLATION INSTRUCTIONS:
NOTE: This is not a self-installing patch. It requires the user to manually replace the original file with this new one.
Download the new file, hpoaol07.exe to a local drive. Make note where (in which folder) the file gets copied.
In Windows Explorer (or by some equivalent means) go to the folder where new hpoaol07.exe was copied, right click on "hpoaol07.exe" and select "copy"
Browse to the location of the old installed hpoaol07.exe file. The default is: C:\Program Files\Hewlett-Packard\HP OfficeJet G series\bin
Right-click on this folder and select "Paste"
When the "Confirm File Replace" dialog appears, confirm that the replacement file is newer and then select [yes].
Manual installation is complete.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows ME
Download file size: 40.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
English American
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
English American
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
English American
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
English American
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
English American
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
English American
Size Driver
32.3MB
File Name
g95nten.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.37M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
English American
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
English American
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
English American
Size Driver
64.1MB
File Name
a140609_enu_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 64.11M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS 9-Mac OS X
Version
7.3.1
Language Driver
French
Size Driver
61.6MB
File Name
g_731_fr.smi.hqx
Observations
HP Officejet G Series All-in-One software for Mac OS 9.x and Mac OS X v10.1.x
Operating system(s): Mac OS 9, Mac OS X
Download file size: 61.68M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS X
Version
7.3.1
Language Driver
French
Size Driver
63.7MB
File Name
g_731_fr.dmg
Observations
HP Officejet G Series All-in-One software for Mac OS X v10.2.8, v10.3 and v10.4
Operating system(s): Mac OS X
Download file size: 63.77M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.01.06.09)
Language Driver
French
Size Driver
71.5MB
File Name
a140609_fra_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.58M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
French
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
French
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
French
Size Driver
34.1MB
File Name
g95win95fr.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.18M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
French
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
French
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
French
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
French
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
French
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
French
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
French
Size Driver
33MB
File Name
g95ntfr.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 33.02M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
French
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
French
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
French
Size Driver
71.5MB
File Name
a140609_fra_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.52M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS 9-Mac OS X
Version
7.3.1
Language Driver
German
Size Driver
61.9MB
File Name
g_731_de.smi.hqx
Observations
HP Officejet G Series All-in-One software for Mac OS 9.x and Mac OS X v10.1.x
Operating system(s): Mac OS 9, Mac OS X
Download file size: 61.97M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS X
Version
7.3.1
Language Driver
German
Size Driver
63.7MB
File Name
g_731_de.dmg
Observations
HP Officejet G Series All-in-One software for Mac OS X v10.2.8, v10.3 and v10.4
Operating system(s): Mac OS X
Download file size: 63.74M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
German
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
German
Size Driver
71.5MB
File Name
a140609_deu_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.58M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
German
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
German
Size Driver
34.1MB
File Name
g95win95ge.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.13M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
German
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
German
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
German
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
German
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
German
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
German
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
German
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
German
Size Driver
32.9MB
File Name
g95ntge.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.97M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
German
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
German
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
German
Size Driver
71.5MB
File Name
a140609_deu_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.53M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS 9-Mac OS X
Version
7.3.1
Language Driver
Italian
Size Driver
62.3MB
File Name
g_731_it.smi.hqx
Observations
HP Officejet G Series All-in-One software for Mac OS 9.x and Mac OS X v10.1.x
Operating system(s): Mac OS 9, Mac OS X
Download file size: 62.39M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS X
Version
7.3.1
Language Driver
Italian
Size Driver
63.7MB
File Name
g_731_it.dmg
Observations
HP Officejet G Series All-in-One software for Mac OS X v10.2.8, v10.3 and v10.4
Operating system(s): Mac OS X
Download file size: 63.71M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Italian
Size Driver
71.3MB
File Name
a140609_ita_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.4M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Italian
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Italian
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Italian
Size Driver
33.9MB
File Name
g95win95it.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.0M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Italian
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Italian
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Italian
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
Italian
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Italian
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Italian
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Italian
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Italian
Size Driver
32.8MB
File Name
g95ntit.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.84M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Italian
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
Italian
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Italian
Size Driver
71.3MB
File Name
a140609_ita_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.33M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Korean
Size Driver
71.9MB
File Name
a140609_kor_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.92M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Korean
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Korean
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Korean
Size Driver
34.1MB
File Name
g95win95ko.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.13M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Korean
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Korean
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Korean
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
Korean
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Korean
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Korean
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Korean
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Korean
Size Driver
32.6MB
File Name
g95ntko.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.69M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Korean
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Korean
Size Driver
71.8MB
File Name
a140609_kor_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.86M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Network Ready Software and Driver
Operating System
Windows XP
Version
3.00
Language Driver
Korean
Size Driver
71.7MB
File Name
a1406_04_kor_xp-network.exe
Observations
Driver includes all the same software as CD part number C6737-10003, version 3.00 (software version A.14.06.04), with the following components not-included to reduce download time; PrintCreator; Product Tour; ReadIris application; and Share2Web.
Operating system(s): Microsoft Windows XP
Download file size: 71.77M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Portuguese
Size Driver
71.4MB
File Name
a140609_ptg_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.49M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Portuguese
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Portuguese
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Portuguese
Size Driver
34MB
File Name
g95win95pr.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.05M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Portuguese
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Portuguese
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Portuguese
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
Portuguese
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Portuguese
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Portuguese
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Portuguese
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Portuguese
Size Driver
32.8MB
File Name
g95ntpr.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.89M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Portuguese
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Portuguese
Size Driver
71.4MB
File Name
a140609_ptg_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.43M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Portuguese Brazilian
Size Driver
71.4MB
File Name
a140609_ptg_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.49M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Portuguese Brazilian
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Portuguese Brazilian
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Portuguese Brazilian
Size Driver
34MB
File Name
g95win95pr.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.05M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Portuguese Brazilian
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Portuguese Brazilian
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Portuguese Brazilian
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Portuguese Brazilian
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Portuguese Brazilian
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Portuguese Brazilian
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Portuguese Brazilian
Size Driver
32.8MB
File Name
g95ntpr.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.89M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Portuguese Brazilian
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Portuguese Brazilian
Size Driver
71.4MB
File Name
a140609_ptg_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.43M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS 9-Mac OS X
Version
7.3.1
Language Driver
Spanish
Size Driver
61.8MB
File Name
g_731_es.smi.hqx
Observations
HP Officejet G Series All-in-One software for Mac OS 9.x and Mac OS X v10.1.x
Operating system(s): Mac OS 9, Mac OS X
Download file size: 61.81M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Web installers
Operating System
Mac OS X
Version
7.3.1
Language Driver
Spanish
Size Driver
63.6MB
File Name
g_731_es.dmg
Observations
HP Officejet G Series All-in-One software for Mac OS X v10.2.8, v10.3 and v10.4
Operating system(s): Mac OS X
Download file size: 63.64M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver Web Package
Operating System
Windows 2000
Version
3.10 (A.14.06.09)
Language Driver
Spanish
Size Driver
71.4MB
File Name
a140609_esn_2k_nw.exe
Observations
HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:
For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows 2000
Download file size: 71.48M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Spanish
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Spanish
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows 95
Version
2.43
Language Driver
Spanish
Size Driver
34MB
File Name
g95win95sp.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows 95
Download file size: 34.06M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
n/a
Language Driver
Spanish
Size Driver
68KB
File Name
oj564.exe
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program. Once the program has been installed on your system, you do not need to save the oj564mu.exe.
Copy the file to the following drive C:/WINDOWS/system.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the words "Download Now" above.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program.
Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the following drive C:/WINDOWS/System
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 68.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98
Version
na
Language Driver
Spanish
Size Driver
123KB
File Name
oj568.drv
Observations
Print to fax issue on windows 9x Hebrew operating systems.
Symptom:
Initiating a PC generated fax from a MS Office 97 & 2000 application using a Windows Hebrew Operating System will cause a GPF ... module lamh.dll.error message>
This software provides you:
The ability to utilize the "Print to Fax" function on the HP OfficeJet G Series.
You can fax documents directly from a MS Office 97 & 2000 application.
Downloading Instructions:
Close all applications that are running.
Click on the Download to download the file.. Save the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Complete the installation/save instructions as soon as you have selected one of the above options.
Restart your computer when finished.
For Netscape users:
The file will automatically download once you click on the Download.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program. Saving the file in the following location will replace the old version of that file that is causing the error.
Copy the file to the windows\system directory
Note:
If you installed on a drive other than C, then install to the appropriate drive letter.
Follow the installation instructions to install the program on your system.
Restart the computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98
Download file size: 122.87k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Uninstaller Utility
Operating System
Windows 95-98-Me-NT4-2000
Version
N/A
Language Utilities
Spanish
Size Driver
725KB
File Name
uninstall.exe
Observations
HP OfficeJet G Series Uninstaller Utility.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 725.25k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows 95-98-NT4
Version
N/A
Language Driver
Spanish
Size Driver
398KB
File Name
oj567.exe
Observations
The following is a list of additional "Scan To" Destinations that have been added to the HP OfficeJet G Series models. This is only for software versions lower than 2.43, if you have software version 2.43 you do not need this software. If you see an application on this list that you have on your PC, please download this update.
Adobe Acrobat 4
Visioneer PaperPort 6
Netscape E-mail 4.x
MGI PhotoSuite III
Microsoft Front Page 2000
Microsoft Paint
Microsoft Picture-It 2000
Kodak/Wang Image Editor
WordPad
This software provides you with:
The ability to utilize more software applications when "Scanning To". HP has increased the list of software applications that the "G" Series can "Scan To". The OfficeJet "G" Series allows you to send an image to your destination application after you have scanned, edited or adjusted it as needed.
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Netscape users:
Click on the Download to download the file.
Once the file has completed the download process, you will be prompted for the location on your hard drive where you would like to save the program (placing it on the desktop is recommended).
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location. If you choose this option, the file will begin to download immediately into a temporary folder on your system. You will be able to use the added "Scan To" Destinations as soon as the download process is completed.
Save the program to disk. If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
To install this update, simply click on the oj567mu.exe file and the "Scan To" Destinations will be updated automatically.
Note:
When the file is launched, a window box will appear that has the OfficeJet G Series Icon. This will appear for approximately 2-4 seconds. Once the window is gone, the upgrade is completed. You can verify that the upgrade was completed successfully by looking for the software application, from the list above, by pressing the "Scan To" button on the Front Panel until the application appears. You can now delete the file to save space on your hard drive.
Restart your computer when finished.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0
Download file size: 398.5k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Spanish
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 2.43, 2.50, or earlier, as including CD P/N's detailed below:
CD Version 2.50, P/N C6736-60064, SW Build A09.50.12
CD Version 2.50, P/N C6737-60075, SW Build A09.50.12
CD Version 2.43, P/N C6737-60073, SW Build A09.50.12 (Asia)
CD Version 2.50, P/N C6737-10002, SW Build A09.50.12
CD Version 2.43, P/N C6737-10004, SW Build A09.40.03 (Asia)
CD Version 2.50, P/N C6740-60052, SW Build A09.50.12
This patch cannot be used on CD Version's 3.00, or 3.10, or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Spanish
Size Driver
519KB
File Name
networkg.zip
Observations
Symptom:
The Networking Wizard will not run during the installation of the HP OfficeJet G Series software.
This software provides you:
The ability to perform a Networking installation on your HP OfficeJet G Series product using the Windows Me operating system. .
Downloading Instructions:
Close all applications that are running.
Click on the words "Download Now" to download the file.
For Microsoft Internet Explorer users:
Click on the Download to download the file.
Run this program from its current location If you choose this option, the file will begin to download immediately into a temporary folder on your system. You should be able to use it as soon as the download process is completed.
Save the program to disk If you choose this option, you will be prompted for the location on your hard drive where you would like to save the program.
Copy the files to the following drive location C:\Program Files\Hewlett-Packard\HP OfficeJet G Series\bin
Complete the installation/save instructions as soon as you have selected one of the above options.
Operating system(s): Microsoft Windows ME
Download file size: 518.9k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows Me
Version
na
Language Driver
Spanish
Size Driver
56KB
File Name
hpodsr07.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet G series "acquire" text scanning feature of the Readiris software will not run. ReadIRIS software is an OCR (Optical Character Recognition) application that converts scanned images into editable documents.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Driver
Operating System
Windows NT4
Version
2.43
Language Driver
Spanish
Size Driver
32.8MB
File Name
g95ntsp.exe
Observations
The OfficeJet G Series driver on this website is the most current driver available.
This driver is equivalent to the following CD Versions:
1.43 (G55/85 Win 2k fulfillment - Europe and Asia Pacific)
1.39 (Final Release Asia Pacific)
2.43 (Final Release for Latin America, Europe and U.S.)
The version number is located on the CD that came with your HP OfficeJet G Series product. You can also check your software version by launching the HP OfficeJet G Series Director on your PC Desktop. Select the Help button and "About Your HP Software". If you have Software Version: A.09.40.03 or A.09.30.09 (Asia only) then you have the most current version of the software and do not need to download this driver from the web.
Note:
This driver download does not contain the Read IRIS OCR software or the Product Tour. The G55 and G85 drivers do not contain the Networking portion of the software. The G95 driver does contain the Networking software.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 32.9M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4
Version
N/A
Language Driver
Spanish
Size Driver
43KB
File Name
oj566.sys
Observations
This patch only applies to users that have the CD version V. 1.20 and the software version A.09.20.03. (this can be determined by checking the version number (1.20) on the installation CD or by accessing the Director, Help About, Software version A.09.20.03) and have installed the software via a Local or Portable installation.
Symptom:
After installation of the HP OfficeJet G Series software (Networking Version 1.2) the "Scan To" destinations button on the Front Panel will not display the applications nor will the "Scan To" Settings via the HP OfficeJet G Series "Director" work properly. The "Speed Dial Settings" through the Director will also not allow users to enter speed dials. However, speed dials can be entered through the Front Panel.
This software provides you:
The ability to utilize the "Scan To" destinations (through both the Front Panel "Scan To" button and the Director and Speed Dial Settings entries through the HP OfficeJet G Series "Director").
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on the words "Download Now"
Choose the option "Save this program to disk"
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
For Netscape users:
Click on the words "Download Now"
Choose the option "Save to disk".
Click OK
You will be prompted for the location on your hard drive where you would like to save the program. Save the program to the following location: C:/WINDOWS/system32/drivers NOTE: If you did not choose the default location when you installed the OfficeJet, save the file in the bin subfolder of the OfficeJet software.
If prompted to replace an existing file - click Yes.
Click Save.
Restart the computer.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 43.19k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
Spanish
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet g95 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.06.09)
Language Driver
Spanish
Size Driver
71.4MB
File Name
a140609_esn_xp_nw.exe
Observations
HP OfficeJet G95 Windows XP Web Package Driver Version 3.10:
This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.
This driver replaces previous version of the HP OfficeJet G Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:
Download the web package driver file.
Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:
Download the web package driver file.
Connect the G series to the Jetdirect box and the Jetdirect box to the network.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
Select the option for "Networked".
The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help
NOTE:
Operating system(s): Microsoft Windows XP
Download file size: 71.42M
Access to Official Website Hewlett Packard
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.