Clevo 6200 Notebooks & Tablet PCs > Downloads Drivers, Utilities and Manual

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

Toshiba CD-ROM and Sanyo, Teac DVD-ROM Drivers

Size Driver

401KB

File Name

cdvdriver.zip

Observations

This manual describes how to setup the device driver of TOSHIBA ATAPI
CD/DVD-ROM Drive.
This device driver is exclusive use of following TOSHIBA ATAPI CD/DVD-ROM
drives.
XM-5602B, XM-5702B, XM-6002B, XM-6102B, XM-6202B, XM-6302B
XM-1502B, XM-1602B, XM-2402B, XM-1702B, XM-1802B
SD-M1002, SD-M1102, SD-M1202
How to setup the CD-ROM device driver.

1. Copy CD/DVD-ROM device driver to the system disk.

2. Add the following line to CONFIG.SYS of the system disk.
LASTDRIVE=Z
DEVICE=:\CDROMDRV.SYS

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

VGA

Operating System

OS/2

Size Driver

994KB

File Name

6xvgaos2.exe

Observations

This utility includes Trident OS/2 Display Drivers installation
and Trident OS/2 Display Drivers setting.

Installation Procedure

1. Insert Trident OS/2 Display Drivers diskette in Drive A.

From the OS/2 Desktop:

Open the OS/2 System folder, double-click on the Drives object,
and then double-click on drive A. When the drive A folder opens,
double-click on INSTALL.EXE. You can also click on the floppy
drive object from Launch Pad, and then double-click on INSTALL.EXE.

From the OS/2 Command Line:

Open OS/2 System folder, double-click on Command Prompts, and
double-click on either OS/2 Window or OS/2 Full Screen. Then, at
the command line, go to drive A and type:

INSTALL.EXE

and press Enter.

2. The first page of the installation program's window is Screen
Resolution selection page.

. Select the resolution and color depth.

3. The second page is Monitor Model selection page.

. Click on Monitor tab to go to this page.
. Point to and click on the down arrow button to show a list of
monitor models.
. Select the monitor model. If you cannot find your monitor's
model, select "Default".
4. The third page is Refresh Rate selection page.

. Click on Refresh tab to go to this page.
. The refresh rates displayed are the recommended refresh rate for
each resolution by your monitor manufacturer.
. You can change the refresh rates by clicking on down arrow button
to select the refresh rates for corresponding resolution.

5. The fourth page is Frame Buffer Address selection page (Vesa
Local Bus Adapter only).

. Click Desktop tab to go to this page.
. Point to and click the down arrow button to show a list of
available frame buffer address (in unit of MBytes).

6. After the selections, click on the Install button to complete
the installation.

7. Reboot OS/2 to have this installation take effect.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

VGA

Operating System

Windows 95

Size Driver

208KB

File Name

6xvgaw95.exe

Observations

Change History:
***************
05/09/97 V.5.00.10.TW04
1. Add feature to save expand/centering status.
2. Correct the memory size in display applet in Win95 OSR2.
3. Add check for some panels that don't support TV+LCD display.

04/11/97 V.5.00.10.TW03
1. Correct the problem that display screen incorrectly on TV when
Television page is actived.
2. Fixed the bug that show video incorrectly at 800x600 expand to 1024x768 panel
on chip 9385-1.
3. Fixed the problem that some icons will become blank when APM suspend and then
resumed.

04/03/97 V.5.00.10.TW02
1. Fixed the bug that show video incorrectly at 800x600 expand to 1024x768 panel.

03/21/97 V.5.00.10.TW01
1. Add for Dual-HW video windows support for 9685.
2. Correct the NTSC/PAL indicated in 'Television' Page.
3. Change the layout of DDC support in 'Refresh Rate' page.
4. Save the refresh rate when power-down and restore refresh rate
when turn back to that mode.

02/24/97 V.5.00.01.TW02
1. Add check for support Tv but not allowed switching between NTSC/PAL.
2. Correct the icon shown in 'Output Device' page while in LCD only mode.

01/31/97 V.5.00.01.TW01
1. Correct the problem that Output Device pate showing
LCD resolution incorrectly at true color.
2. Show Refresh Rate page while running on Win95 OSR2.
3. Add Uninstall feature for Utility.

01/24/96 V.4.02.10.TW03
1. Correct the problem that show a Big-Blue screen when switch to
full-screen DOS Box while Display Device page is actived.
2. Correct the problem that show output device icon incorrectly
in Display Device page.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

Trident VPM Drivers

Operating System

Windows 95

Size Driver

731KB

File Name

6xvpmvga.exe

Observations

1 Installation
================================

1.1. Insert installation diskette in the floppy drive.
1.2. Go to Control Panel -> Add New Hardware
1.3. Select "No" when asked if you want the Windows to search for the new
hardware.
1.4. Select "Other devices" or "Sound, video and game controllers" from
the hardware list.
1.5. Click "Have disk...", type "A:\Win95" in the browser
dialog box and click OK. You will see three lines in the list.
1.6. Select one of the driver in the list, then click OK.
1.7. If you want to continue install other drivers in the list.
Do not select reboot, and follow steps from 1.2 to 1.6.
1.7. Reboot.
1.8. After installation is complete run Media Player. In the "Device"
menu you should see
- MCI Overlay Driver

2. Trident CODEC driver tricodc.drv
====================================

2.1. The enclosed tricodc.drv is a 32 bit version codec
driver for Windows 95.

2.2. Before installing this codec driver, you need to
install 9385 display driver and DirectDraw.
So Windows 95 can provide DirectDraw services.
Otherwise, this codec driver will not detect
DirectDraw services, and will try to use GDI
services, which results in less quality video.

2.3. You can now use Media Player to play the avi
files captured using trident 9385 capture
drivers.

2.4. Known bugs:
i) Only part size of video is shown if the window
size is smaller than the video size in video
buffer (Current DirectDraw driver can not
handle scaling down).

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

TEAC CD-224E-A CDROM Drivers

Operating System

Windows 95

Version

1.27q

Size Driver

655KB

File Name

teaccdr.exe

Observations

***** How to install the device driver under DOS environment *****

To operate TEAC CD-ROM,the device driver (TEAC_CDI.SYS) has to be installed
from INSTALLATION DISK came along with CD-ROM.
Please follow the instruction below.

1. Boot up the system and insert the INSTALLATION DISK into your floppy
disk drive.

2. At the DOS prompt,type "A:\INSTALL" then press enter. (If your floppy
disk drive is "A:")

3. Installation program will now start.Please follow the instructions on the
screen to complete the installation procedure.

4. When finish,remove the INSTALLATION DISK from the floppy disk drive then
REBOOT your system.

During system reboot,check for the following message to assure that
the driver was loaded properly.

MSCDEX Version 2.23
Copyright (C) Microsoft Corp. 1986-1993. All rights reserved.

Drive X: = Driver TEAC-CDI unit 0

* 'X:' ... Drive letter assigned to CD-ROM Drive

This message means that TEAC CD-ROM drive is now activated.

* Now the installation of TEAC CD-ROMdrive is completed.
***** TEAC CD-ROM DRIVE Trouble Shooting Tips *****

------------------------------------------------------------------------------
Q1: System will not boot when CD-ROM drive is daisy-chained with
hard disk drive.
------------------------------------------------------------------------------
A1: Be sure your hard disk drive jumper is set to MASTER and CD-ROM's to SLAVE.
Please refer to the installation manual for CD-ROM jumper setting and ask
hard drive manufacturer for MASTER jumper setting.
Note: There may be a case where CD-ROM can not be daisy-chained with
Conner hard drive (Conner mode).
A2: Check if the I/F cable is connected reversely.

------------------------------------------------------------------------------
Q2: System hangs without displaying anything when the device driver is loaded
during Boot-up.
------------------------------------------------------------------------------
A1:There is a possibility that TEAC device driver is having a conflict with
others. Please check the position of the device driver statement or remark
driver which may be having a conflict with.
A2:In case that TEAC CD-ROM drive is connected with non TEAC CD-ROM drive in
the same system.
Please re-install the TEAC CD-ROM address by going through 'SELECT I/O PORT'.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

Card Works

Operating System

Windows 95

Size Driver

1.1MB

File Name

6xcdwk95.zip

Observations

SystemSoft's CardWorks(TM)
The Complete PC CARD Solution for Windows 95
_____________________________________________
Contents
--------
Product Description
Copyright Notices
Tips for Using Real Mode Device Drivers
Novell Network Drivers for LAN Cards
CardID Settings for CardWorks
Overriding CardSoft Driver Installation
Advantages to Loading CardWizard at Startup
Using Copy and Paste with CardWizard
Installing CardWorks with a Docking Station
Removing CardWorks
Initializing PC Card Hard Disks (or ATAs)
Limitations
Product Description
-------------------
CardWorks is a Windows 95 software suite that includes SystemSoft's
industry leading CardSoft & CardWizard PC CARD software to enhance
the functionality of PC CARD technology in Windows 95. CardWorks
is intended to make PC CARD use easy and pleasurable, while
affording the greatest compatibility in the computer industry.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

ALPS Touch Pad Drivers

Operating System

Windows 95

Version

4.1.0

Size Driver

379KB

File Name

alpsw95.exe

Observations

AlpsPoint provides a convenient way to modify setting for
Alps GlidePoint. The AlpsPoint drivers are compatible with
most standard mice and similar pointing devices.
____________________________________________________________

README FILE CONTENTS

1. Driver Installation
1.1 Installing from Mouse Properties
1.2 Installing from Device Manager

2. Using the AlpsPoint Control Panel

3 Restoring Your Installation
3.1 If "Alps GlidePoint" can be seen in the model column
3.2 If "Alps GlidePoint" can't be seen in the model column

4. Using Another Mouse
4.1 How to attach the Serial mouse
4.2 How to attach the PS/2 mouse

5. Troubleshooting
5.1 Suspend/Resume
5.2 Installing from Add New Hardware

6. Files On The Setup Disk

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

ALPS Touch Pad Drivers

Operating System

Windows NT

Version

1.02

Size Driver

154KB

File Name

alpswnt.exe

Observations

ApointNT provides a convenient way to modify setting for
Alps GlidePoint. The ApointNT drivers are compatible with
most standard mice and similar pointing devices.
____________________________________________________________

README FILE CONTENTS

1. Driver Installation
1.1 Installing from Mouse Properties

2. Using the ApointNT Control Panel

3 Restoring Your Installation
3.1 If "Alps GlidePoint" can be seen in the model column
3.2 If "Alps GlidePoint" can't be seen in the model column

4. Using Another Mouse
4.1 How to attach the PS/2 mouse

5. Troubleshooting
6. Files On The Setup Disk

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 6xxx Series

Model

Clevo 6200

Description

VGA

Operating System

Windows NT

Size Driver

163KB

File Name

6xvgant40.exe

Observations

WINDOWS NT DRIVER SETUP INFORMATION
for
Trident 93xx/94xx/96xx Users

***********************************************************************
Windows NT Device Drivers Version 1.10 Nov 12, 1996
***********************************************************************
Contents

1.0 Introduction
2.0 Supported Resolutions
3.0 Installation Notes for Windows NT Version 4.0

*****************************

1.0 Introduction

This Accelerate Driver runs on the following products:
9440, 9470, 96XX, 93XX with PCI or VESA local bus.

The Graphics Device Drivers supplied here are for the Microsoft
Windows NT operating system version 4.0.

*****************************

2.0 Supported Modes

This Driver supports resolution up to 1600x1200, and color depth
up to True color (24 or 32 BPP).

****************************

3.0 Installation Notes for Windows NT

This driver package containing:

- TGIULNT.SYS (Trident linear addressing video miniport driver)
- TGIUL40.DLL (Trident 256/64K/16M colors accelerated video display driver)
- TRIDENT.INF (setup files used by Windows NT Setup program)
- TDISPLUS.DLL (Trident display control utility)
- TDISPLUS.HLP (Help File for TDISPLUS.DLL)
- README (This README file for Windows NT Version 4.0)

Windows NT drivers are included on Disk #2 of this package. They are
located in the \NT40 sub-directory

Access to Official Website Clevo

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 14 files for Clevo 6200

Select Files