Digital Research DRCDRom24- AOpen Download Treibers

CDRom driver files are not needed for Windows 9x or NT README file for ATAPI CD-ROM device driver
================================================
I. Introduction
II. Requirements
III. Installation Procedures
IV. Changing Settings after Installation
I. Introduction
================
This CD-ROM package comes with an installation utility. This utility
installs the necessary CD-ROM software device driver needed by your
CD-ROM drive to interface with your PC system.

Files
-----
The drive installation diskette includes the following files:

README.TXT -- This user information text file
INSTALL.EXE -- CD-ROM installation program
AOATAPI.SYS -- CD-ROM device driver

II. Requirements
=================
Hardware Requirements
---------------------
1. IBM PC/AT or compatible (80386-base system or higher recommended)
2. Minimum VGA graphic display
3. Minimum 2M RAM recommended
4. one free IDE socket
5. one CD-ROM drive

Software Requirement
--------------------
1. Microsoft Windows 3.1 or later
2. MS-DOS version 6.0 or later
3. MS-DOS CD-Extension (MSCDEX 2.21) or later

III. Installation Procedures
============================

To install CD-ROM device driver, please follow the steps below:

1. Insert the installation diskette in your system's 3.5-inch floppy
disk drive.

2. Change the directory to that of your floppy disk drive, and type
the following at the DOS prompt:

INSTALL <Enter>

3. Follow the screen instructions to complete the installation.

4. Reboot system to activate the driver.
In general, you can just continuously press the Enter key to install
the default settings. A directory (default C:\CDROM) containing the
CD-ROM driver will be created during installation. Your AUTOEXEC.BAT
and CONFIG.SYS files will also be modified to include the following
lines:

CONFIG.SYS :
[common]
DEVICE=C:\CDROM\AOATAPI.SYS /D:IDECD000
LASTDRIVE=N

AUTOEXEC.BAT :
C:\DOS\MSCDEX.EXE /D:IDECD000