Kyocera FineCam S4 Download Treibers
Verfügbare 1 dateien für FineCam S4
Firma
Kyocera
Komponente
Digitalfotografie
Modell
Kyocera FineCam S4
Beschreibung
FineCam S4
Betriebssystem
Windows 98-98Se-Me-2000-XP
Größe
1Mb
Dateiname
s3xs4.zip
Beschreibung
S3x/S4
System Requirements
Pentium 166 MHz processor or higher
Windows 98/98SE/2000/ME/XP
Macintosh OS 8.6 or later
Available USB port
At least 32 MB RAM
80 MB available hard disk space
CD-ROM drive
Color monitor (800x600 24-bit or higher recommended)
Microsoft Internet Explorer 4.0 or higher
For Win98/ME/2000/XP download S3XS4.zip file at the end of these directions. Unzip files and run Setup.exe. Afterwards reboot PC and follow rest of installation below.
To Install/Connect to your Kyocera Finecam S3x or S4 in Win98/ME/2000/XP )
1.) Let Windows load completely to the desktop.
2.) Close any programs running in the background.
3.) Unplug all external USB devices.
4.) With the camera turned off, Plug in the USB cable to the camera. Make sure the camera is set to PC mode.
5.) Turn on the power to the camera and connect the USB cable to the computer's USB slot. The Add New Hardware wizard will start and install drivers.
6.) To View Images - Open My Computer, there should be a Removable Disk icon. Double click the icon to open the folder. Then double click on DCIM folder to open. Then double click the XXXKCBOX folder (where XXX is a numerical number). You should see your images. Double-click on an image to view.
Installation directions for MAC
1.) Verify the Mass Storage Drivers are up to date, which as of
09/06/02, is version 1.3.5. this is true of OS 8.6 only, there is no USB support lower then this OS
2.) To update the Storage Drivers goto www.apple.com then hit the support button at the top right and in the search field type "Mass Storage", the list that results will have the latest drivers at the very top of the list.
3.) Once downloaded and unpacked drag the extension onto the Systems Folder. The OS will place the extension into the correct sub-folders.
4.) Turn on the Camera and set to PC mode if needed. Connect the USB cable to the Camera first and then connect the USB cable to the computer.
5.) Untitled Disk will appear on the desktop. This may have a PC in the name, but will provide a way to access the Camera's memory card. There should be a folder within the Untitled Disk named DCIM and then within that one a folder named 100kcbox. The image files will be in the last folder.
6.) If problems persist suggest upgrading to the newest OS if
possible or enter the Extensions Manager Control Panel and enable only the base set for trouble shooting, then manually choose the USB extensions if they were not included in the base set extensions.
S3x/S4 Win98driver/Win2000/XP
System Requirements
Pentium 166 MHz processor or higher
Windows 98/98SE/2000/ME/XP
Macintosh OS 8.6 or later
Available USB port
At least 32 MB RAM
80 MB available hard disk space
CD-ROM drive
Color monitor (800x600 24-bit or higher recommended)
Microsoft Internet Explorer 4.0 or higher
For Win98/ME/2000/XP download S3XS4.zip file at the end of these directions. Unzip files and run Setup.exe. Afterwards reboot PC and follow rest of installation below.
To Install/Connect to your Kyocera Finecam S3x or S4 in Win98/ME/2000/XP )
1.) Let Windows load completely to the desktop.
2.) Close any programs running in the background.
3.) Unplug all external USB devices.
4.) With the camera turned off, Plug in the USB cable to the camera. Make sure the camera is set to PC mode.
5.) Turn on the power to the camera and connect the USB cable to the computer's USB slot. The Add New Hardware wizard will start and install drivers.
6.) To View Images - Open My Computer, there should be a Removable Disk icon. Double click the icon to open the folder. Then double click on DCIM folder to open. Then double click the XXXKCBOX folder (where XXX is a numerical number). You should see your images. Double-click on an image to view.
Installation directions for MAC
1.) Verify the Mass Storage Drivers are up to date, which as of
09/06/02, is version 1.3.5. this is true of OS 8.6 only, there is no USB support lower then this OS
2.) To update the Storage Drivers goto www.apple.com then hit the support button at the top right and in the search field type "Mass Storage", the list that results will have the latest drivers at the very top of the list.
3.) Once downloaded and unpacked drag the extension onto the Systems Folder. The OS will place the extension into the correct sub-folders.
4.) Turn on the Camera and set to PC mode if needed. Connect the USB cable to the Camera first and then connect the USB cable to the computer.
5.) Untitled Disk will appear on the desktop. This may have a PC in the name, but will provide a way to access the Camera's memory card. There should be a folder within the Untitled Disk named DCIM and then within that one a folder named 100kcbox. The image files will be in the last folder.
6.) If problems persist suggest upgrading to the newest OS if
possible or enter the Extensions Manager Control Panel and enable only the base set for trouble shooting, then manually choose the USB extensions if they were not included in the base set extensions.
S3x/S4 Win98driver/Win2000/XP
