Foxconn 760GXK8MC Download Drivers, Manual and BIOS

760GXK8MC 1. Change Athlon 3700+ cpu’s VID 2.Patch for installed memory show error 3.Add sign on message” WinFast 760GXK8MC Series 54EW1P23 100805”

1 Add solution for DMI data loss caused by changing ROM layout.2.Add solution for CMOS checksum error message caused by changing intruder.3.Add patch for Clear screen before waiting password input as usual rule.4.Add patch for PS/2 S1 wakeup fail if disable ps/2 wakeup function in setup.5.Add patch for Patch HCT12.1 unreported memory issue.6.Add patch for win98 'System board extension for ACPI BIOS' yellow mark issue.

Chapter 1 Foxconn 760GXK8MC Product Introduction
Main Features . 2
Motherboard Layout . 4
Rear Panel Connectors . 5
Chapter 2 Foxconn 760GXK8MC Installation Instructions
CPU. 8
Memory . 11
Power Supply . 13
Other Connectors . 14
Expansion Slots . 18
Jumpers . 19

Chapter 3 Foxconn 760GXK8MC BIOS Description

Enter BIOS Setup . 23
Main Menu . 23
Standard CMOS Features . 25
BIOS Features . 28
Advanced BIOS Features . 29
Advanced Chipset Features . 33
Integrated Peripherals . 37
Power Management Setup . 41
PnP/PCI Configurations . 45
PC Health Status . 46
Frequency/Voltage Control . 47
Load Fail-Safe Defaults . 48
Load Optimized Defaults . 48
Set Supervisor/User Password . 48
Save & Exit Setup. 49
Exit Without Saving. 49

Chapter 4 Foxconn 760GXK8MC Driver CD Introduction

Utility CD content . 51
Start to install drivers. 52

Chapter 5 Foxconn 760GXK8MC Directions for Bundled Software

SuperStep. 54
SuperUpdate . 57
SuperLogo . 62
Chapter 6 Foxconn 760GXK8MC Special BIOS Functions

SuperBoot . 65
SuperBIOS-Protect . 66
SuperSpeed . 67
SuperRecovery . 68

SiS PCI Fast Ethernet Adapter Driver Setup Utility
for Windows 9X/Me/2000/XP Driver
======================

Note for using this Setup Utility
----------------------------------------
For Windows 98/98SE/Me/2000/XP:
----------------------------------------

Install the driver with "setup" or "setup -s" command:
1. setup: The Install shield will prompt you the steps to install
the driver.

2. setup -s: The Install shield will complete the installation
without prompting you any instruction.

----------------------------------------
For Windows 95/OSR2:
----------------------------------------

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the PCI Ethernet Controller, you should
click "Next" until "Finish" is clicked without specifying location
of the driver. You will see the "PCI Ethernet Controller" in the
Device Manager.

2. Then you can install the driver with "setup" or "setup -s" command:
a) setup: The Install shield will prompt you the steps to install
the driver.

b) setup -s: The Install shield will complete the installation
without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. After remove the driver, please restart the system immediately.

----------------------------------------
For Windows NT 3.5x/4.0
----------------------------------------
Do not use this utility in Windows NT 3.5x or 4.0.

SiS AGP Driver Foxconn 760GXK8MC

Windows 2000/XP/Me/98/Server2003

This readme file is used to provide the information for installation,

Install and Uninstall Foxconn 760GXK8MC AGP Driver.
========================

The SiS AGP driver is installed for AGP bus used by VGA Card.It offer efficient
functions for VGA driver.With installation of AGP driver,it provide high
performance and good compatibility for different hardware.
This package include four parts.
1. Windows XP/Windows 2000/Windows 2003 AGP filter driver: Which can support AGP 8x chipset if chipset and VGA card support.
2. Windows Me/Win98 AGP miniport driver:Which can support AGP 8x chipset if chipset and VGA card support.
3. Some Windows patches:
SIS_LIB.DLL,SISPORT.SYS (winxp) : they are used for reading PCI port.
SiSUSBrg.exe (winxp): Add registry for USB bug under Windows XP
Mp_s3.exe (Windows Me):Patch old SiS 961 FERR bug
Openhci.sys (Win98):Provided by Microsoft to update Win98 USB OHCI
4. Execute ata133.exe for IDE to let IDE support UDMA 133 (XP) and 48bit Capacity of
HD.It also set IDE device to run UDMA as possible.


CONTENTS
***********************
1) System Requirements
2) Windows 2000/Windows XP/Windows 98/Windows Me/Windows 2003 Driver
3) Package Version Identify
4) Silent Install Driver
5) Verifying Installation of the Driver

1) System Requirements

* This package should be installed on the AGP chipset,and others'
chipset will not be supported.

* The SiS AGP Driver supports the following Operation System.

Operation System Version
========================
Windows 2000 2195
Windows XP 5.1.2600.0 or above
Windows Server 2003 5.2.3790.0 or above
Millennium RTM
Windows 98 4.10.1998
========================
2) Windows 2000/Windows XP/Windows 98/Windows Me/Windows 2003 Driver

*************************
Driver Installation for Foxconn 760GXK8MC
*************************
Click the SETUP.EXE program and select "Install" button then it will
install the SiS AGP Driver automatically on your Windows system. It
will copy the driver to the \WINNT\SYSTEM32\DRIVERS and set the related
registry tree.


***************************
Driver Foxconn 760GXK8MC Uninstallation
***************************
You could remove the SiS AGP Driver by selecting the "Uninstall"
button. It will completely remove the driver from the sytsem.


3) Package Version Identify

The setup program will display the released data and version for this package.

4) Silent Install Driver

Run "setup -s" for Windows XP/WIN2k/98/Me/2003.

5) Verifying Installation of the Driver
For Windows 2000/XP/98/Me/2003:
1. Open "Control Panel".
2. Select "Device Manager" from "Control Panel".
3. Select "System devices" from "Device Manager".
4. Check if the "SiS Accelerated Graphics Port" exist or not.
5. If it is then your installation is successful.

AMD onboard AUDIO drivers for 32bit

SiS AGP Driver Foxconn 760GXK8MC

Windows 2000/XP/Me/98

This readme file is used to provide the information for installation,

Install and Uninstall Foxconn 760GXK8MC AGP Driver.
========================

The SiS AGP driver is installed for AGP bus used by VGA Card.It offer efficient
functions for VGA driver.With installation of AGP driver,it provide high
performance and good compatibility for different hardware.
This package include four parts.
1. Windows XP/Windows 2000 AGP filter driver: Which can support AGP 8x chipset if chipset and VGA card support.
2. Windows Me/Win98 AGP miniport driver:Which can support AGP 8x chipset if chipset and VGA card support.
3. Some Windows patches:
SIS_LIB.DLL,SISPORT.SYS (winxp) : they are used for reading PCI port.
SiSUSBrg.exe (winxp): Add registry for USB bug under Windows XP
Mp_s3.exe (Windows Me):Patch old SiS 961 FERR bug
Openhci.sys (Win98):Provided by Microsoft to update Win98 USB OHCI
4. Execute ata133.exe for IDE to let IDE support UDMA 133 (XP) and 48bit Capacity of
HD.It also set IDE device to run UDMA as possible.
5. SisAGP utility setting AGP transfer rate only used in SIS AGP new driver.


CONTENTS
***********************
1) System Requirements
2) Windows 2000/Windows XP/Windows 98/Windows Me Driver
3) Package Version Identify
4) Silent Install Driver
5) Verifying Installation of the Driver