Hewlett Packard HP LaserJet 3015 All-in-One > Download Drivers, Utilities and Firmware

To have the complete software installed you must download the Help, User Guide for your specific model and software - 3 separate downloads.
This download installs the User Guide for the HP LaserJet 3015 all-in-one product and should be installed before the all-in-one software has been installed. The HP LaserJet all-in-one software needs to be downloaded separately.

The software contained in this download supports the following Mac operating system and products:
Mac OS 9.1, 9.2.x, 10.2.x, 10.3.x
LaserJet 3015

How to Apply This Software Update
Below are easy-to-follow instructions for downloading and installing your LaserJet all-in-one software.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive.
Expand the file by finding the directory where the file was saved. Double click on the file.
Installing the HP LaserJet all-in-one User's Guide System
To install the software for your HP LaserJet All-in-One, follow these steps:
Verify you are using a supported version of the Mac Operating System.
If you are installing the software's help system or the product's User Guide, download and install these utilities prior to installation of the HP LaserJet all-in-one software.
Launch the software installer from the downloaded location by clicking on the HP LaserJet 3015 User's Guide.
Choose to install on the installer UI.

To have the complete software installed you must download the Help, User Guide for your specific model and software - 3 separate downloads.
This download installs the Help for the HP LaserJet all-in-one products listed below and should be installed before the all-in-one software has been installed. The HP LaserJet all-in-one software needs to be downloaded separately.

The software contained in this download supports the following Mac operating systems and products:
Mac OS 9.1, 9.2.x, 10.2.x, 10.3.x
LaserJet 3015
LaserJet 3020, 3030
LaserJet 3380

How to Apply This Software Update
Below are easy-to-follow instructions for downloading and installing your LaserJet all-in-one software.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive.
Expand the file by finding the directory where the file was saved. Double click on the file.
Installing the HP LaserJet all-in-one Software Help
To install the software for your HP LaserJet All-in-One, follow these steps:
Verify you are using a supported version of the Mac Operating System.
Download and install the software's help system prior to installation of the HP LaserJet all-in-one software.
Launch the software installer from the downloaded location by clicking on the LaserJet aio Help.
Choose to install on the installer UI.

To have the complete software installed you must download the Help, User Guide for your specific model and software - 3 separate downloads.
This download installs the software for the HP LaserJet all-in-one products listed below and does not install the Help software or User Guide. The HP LaserJet all-in-one Help software and User Guide need to be downloaded separately and should be installed before the all-in-one software has been installed.
To order a copy of the CD with the latest version of the software, please visit our CD-ROM order page.

The software contained in this download supports the following Mac operating systems and products:
Mac OS 9.1, 9.2.x, 10.2.x, 10.3.x
LaserJet 3015
LaserJet 3020, 3030
LaserJet 3380

How to Apply This Software Update
Below are easy-to-follow instructions for downloading and installing your LaserJet all-in-one software.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive.
Expand the file by finding the directory where the file was saved. Double click on the file.
Upgrading from earlier versions of the HP LaserJet all-in-one software
If you are upgrading an earlier version of your product software, you must uninstall the previous HP LaserJet all-in-one software version (any version earlier than 5.9.5) prior to installing this version. This can be done by launching the uninstaller located at <disk>/Applications/HP All-In-One Software/HP AIO Uninstaller for OSX or <disk>/Applications (Mac OS 9)/HP All-In-One Software/HP AIO Uninstaller for OS9. Once the previous HP All-in-One software has been removed, follow the steps in the next section: Installing the HP LaserJet all-in-one Software to install the updated software version.
Upgrading from earlier versions of Mac OS.
If you are upgrading your operating system, you must uninstall the HP LaserJet all-in-one software (any version earlier than 5.9.5) prior to upgrading the operating system. This can be done by launching the uninstaller located at <disk>/Applications/HP All-In-One Software/HP AIO Uninstaller for OSX or <disk>/Applications (Mac OS 9)/HP All-In-One Software/HP AIO Uninstaller for OS9. Once the HP All-in-One software has been removed, upgrade the operating system as recommended by Apple and follow the steps in the next section: Installing the HP LaserJet all-in-one Software.
Installing the HP LaserJet all-in-one Software
To install the software for your HP LaserJet All-in-One, follow these steps:
Verify you are using a supported version of the Mac Operating System.
If upgrading from an earlier software installation, remove any remaining print queues for the all-in-one product. In OS9, this can be accomplished by dragging the desktop print and fax queues to the trash. In OSX, this can be accomplished by deleting the product print and fax queues from Print Center.
If you plan to install the software's help system or the product's User Guide, download and install these utilities prior to installation of the software.
Launch the software installer from the downloaded location by clicking on the LaserJet aio Installer.
On OSX systems, you will be asked to enter administrator credentials.
Choose to Accept the terms of the license agreement.
Select the HP all-in-one product you plan to use with the software and choose OK.
If applicable (not for network installations), connect the USB cable between your computer and the HP all-in-one product if it is not already connected and choose OK.
When prompted, choose to restart the computer.
After the computer restarts, the HP All-in-One Setup Assistant will launch. If it does not, launch it manually. This can be done in OS9 by clicking <disk>/Applications (Mac OS 9)/HP laserjet aio/HP all-in-one Setup Assistant.In OSX, double click <disk>/Applications/HP laserjet aio/HP all-in-one Setup Assistant.
Complete the steps in the HP All-in-One Setup Assistant application as prompted.

The download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280

Description
The HP LaserJet 30XX Font Download Utility allows the downloading of the Cyrillic fonts into the printer RAM. This is needed due to the lack of a Cyrillic on-board font for non-Windows based solutions.

Version 1.1
Repackaged to support these models.
HP LJ 3015, 3020, 3030, 3050, 3052, 3055, 3380, 3390, 3392
Download Info
The utility is a DOS based program. However, it can also be used in a DOS/COMMAND window under Windows 98, Windows Me, Windows 2000 and Windows XP operating systems.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the download package file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file to begin extracting the utility onto your hard drive. The default directory for the extraction is C:\DL30XX. It is necessary that you have the proper user permissions to read and for the path chosen to install. After extraction, the install is complete.
Operation
Consult the README.TXT file in the extraction folder for instructions to use the DL30XX.EXE utility.

Description
The HP LaserJet 30XX Font Download Utility allows the downloading of the Cyrillic fonts into the printer RAM. This is needed due to the lack of a Cyrillic on-board font for non-Windows based solutions.

Version 1.1
Repackaged to support these models.
HP LJ 3015, 3020, 3030, 3050, 3052, 3055, 3380, 3390, 3392
Download Info
The utility is a DOS based program. However, it can also be used in a DOS/COMMAND window under Windows 98, Windows Me, Windows 2000 and Windows XP operating systems.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the download package file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file to begin extracting the utility onto your hard drive. The default directory for the extraction is C:\DL30XX. It is necessary that you have the proper user permissions to read and for the path chosen to install. After extraction, the install is complete.
Operation
Consult the README.TXT file in the extraction folder for instructions to use the DL30XX.EXE utility.

Description
The HP LaserJet 30XX Font Download Utility allows the downloading of the Cyrillic fonts into the printer RAM. This is needed due to the lack of a Cyrillic on-board font for non-Windows based solutions.

Version 1.1
Repackaged to support these models.
HP LJ 3015, 3020, 3030, 3050, 3052, 3055, 3380, 3390, 3392
Download Info
The utility is a DOS based program. However, it can also be used in a DOS/COMMAND window under Windows 98, Windows Me, Windows 2000 and Windows XP operating systems.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the download package file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file to begin extracting the utility onto your hard drive. The default directory for the extraction is C:\DL30XX. It is necessary that you have the proper user permissions to read and for the path chosen to install. After extraction, the install is complete.
Operation
Consult the README.TXT file in the extraction folder for instructions to use the DL30XX.EXE utility.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380pswin2kxp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380pcl6winnt4). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

Enhancements

An installation program to assist with installation.
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable scan driver and TWAIN scan driver.
Plug and Play installable printer driver.
The product CD can be used at a later time to install additional product software, such as Scan To Email, Toolbox, and FAX driver (3015, 3030, and 3380 only).
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj30xx_3380pcl6-en.exe -s -a -silent

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive and launch the installer. The default directory is Program Files\Hewlett-Packard\LaserJet 30XX_3380 Drivers. However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Follow the instructions presented by the installation program.

The full software solution provides print, fax and scan functionality. This software solution is the same solution as the Version 3.0 in-box CD that came with your HP LaserJet all-in-one device.
This is not a software upgrade for versions of the software prior to 3.0. If a prior version of the HP LaserJet all-in-one software is currently installed, it must be uninstalled before installing this version.
Download Info

This section will help you in the download of the software to your computer and start you on the install process.


Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\LJ3XXXEE). However, you can change the path and directory name at the time of extracting the file. Please note the directory and path where the files are extracted.
Install this file by clicking Start then Run on your PC. Select Browse and find the directory where the file had been saved. Double-click on the file, HPsetup.exe to start the install.
Follow the on-screen instructions.

The full software solution provides print, fax and scan functionality. This software solution is the same solution as the Version 3.0 in-box CD that came with your HP LaserJet all-in-one device.
This is not a software upgrade for versions of the software prior to 3.0. If a prior version of the HP LaserJet all-in-one software is currently installed, it must be uninstalled before installing this version.
Download Info

This section will help you in the download of the software to your computer and start you on the install process.


Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\LJ3XXXAM). However, you can change the path and directory name at the time of extracting the file. Please note the directory and path where the files are extracted.
Install this file by clicking Start then Run on your PC. Select Browse and find the directory where the file had been saved. Double-click on the file, HPsetup.exe to start the install.
Follow the on-screen instructions.

The full software solution provides print, fax and scan functionality. This software solution is the same solution as the Version 3.0 in-box CD that came with your HP LaserJet all-in-one device.
This is not a software upgrade for versions of the software prior to 3.0. If a prior version of the HP LaserJet all-in-one software is currently installed, it must be uninstalled before installing this version.
Download Info

This section will help you in the download of the software to your computer and start you on the install process.


Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\LJ3XXXAP). However, you can change the path and directory name at the time of extracting the file. Please note the directory and path where the files are extracted.
Install this file by clicking Start then Run on your PC. Select Browse and find the directory where the file had been saved. Double-click on the file, HPsetup.exe to start the install.
Follow the on-screen instructions.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380pcl5ewin2kxp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

Enhancements

An installation program to assist with installation.
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable scan driver and TWAIN scan driver.
Plug and Play installable printer driver.
The product CD can be used at a later time to install additional product software, such as Scan To Email, Toolbox, and FAX driver (3015, 3030, and 3380 only).
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj30xx_3380pcl5-en.exe -s -a -silent

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive and launch the installer. The default directory is Program Files\Hewlett-Packard\LaserJet 30XX_3380 Drivers. However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Follow the instructions presented by the installation program.

Enhancements

An installation program to assist with installation.
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable scan driver and TWAIN scan driver.
Plug and Play installable printer driver.
The product CD can be used at a later time to install additional product software, such as Scan To Email, Toolbox, and FAX driver (3015, 3030, and 3380 only).
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj30xx_3380pcl5-en.exe -s -a -silent

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive and launch the installer. The default directory is Program Files\Hewlett-Packard\LaserJet 30XX_3380 Drivers. However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Follow the instructions presented by the installation program.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

Enhancements

An installation program to assist with installation.
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable scan driver and TWAIN scan driver.
Plug and Play installable printer driver.
The product CD can be used at a later time to install additional product software, such as Scan To Email, Toolbox, and FAX driver (3015, 3030, and 3380 only).
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj30xx_3380pcl6-en.exe -s -a -silent

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive and launch the installer. The default directory is Program Files\Hewlett-Packard\LaserJet 30XX_3380 Drivers. However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Follow the instructions presented by the installation program.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

Readme

Enhancements

HP LaserJet 3015/3020/3030/3380 software update addresses the following issues:
This is a software update for the HP LaserJet 3015/3020/3030/3380. This is not a full installation of the all-in-one software. In order to use this software download, you must already have completed a Minimum or Typical installation of the all-in-one software from your in-box CD.
Version 4.1
Allows PC to go into hibernate mode.
More Robust Receive-To-PC functionality.
More reliable launching of Scan-to destinations.
Registering of HPbmiapi.dll (1904 Error).
Scanning of multiple pages on flatbed.
Robust network rediscovery (DHCP) for scanning.
Version 3.1
Includes all enhancements provided in Versions 2.0 and 1.1.
Erroneous error message when scanning to email is no longer displayed.
The default file size when scanning to a PC has been significantly reduced for most PDF and JPG file types.
The paper size dimensions in scanned PDF's will be the expected size.
The paper size selection in the scan application will now display the appropriate paper size.
Network connections are now more robust.
Added diagnostic support capabilities to HPbpsttp.exe.
The temporary files created when scanning to email or 3rd party applications will now be located in a sub directory of the current users temporary directory.
Uninstalling will now leave the data from faxes received to PC intact.
Faxes received to PC will now take up much less disk space.
Version 2.0
Includes all enhancements provided in Version 1.1.
The Scan-to application now recognizes if Readiris version 9.0 is installed and adds it to the destination box.
Scan-to email now more robust.
Toolbox scan to file types now match what is actually supported.
The Scan-to button now uses correct defaults, even when the user has created a different default quick set.
Scan-to email now puts a copy of the message into the Sent Items folder.
Chinese alerts were in English and have been localized.
Limited access fax user functionality.
Clipped German text in the search for software updates.
Czech mis-translation of the word 'Volumes' is now corrected to 'Hlasitost'.
Localization of the Czech screen has been corrected.
Toolbox Order Supplies privacy page now meets the IESO specs.
Receive to PC standard faxes are no longer distorted.
Default directory now available for Scan-To application through cmd line ore registry key only.
Filename prefix variable now available for the Scan-To application (to use when using Scan-To from device.)
Fixed maximum number that a temporary scan filename can use to 32,767.
PCLXL error when changing the paper type is no longer a problem.
Version 1.1
Addresses cases where Toolbox, Scan and Receive Faxes to computer features stop working over time when networked using a Jet Direct Print Server.
Eliminated the need for someone with administrative privileges to perform a scan before any other scan can be performed.
Added a Version.ini file to confirm the version of software installed on a computer.
Added A4 as a standard paper size selection in the Scan Settings dialogue of the HP LaserJet Scan software.
Enhanced the capability of the HP LaserJet Scan software when multiple TWAIN sources are installed or when the TWAIN source name contains a number.
Adjusted the default Scan Size and Scan dimension measurement units in the Scan Settings dialogue of the HP LaserJet Scan software based upon country or region.
Added automatic retries for Scan to-email failures using the different email protocols.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary, default directory on your PC by clicking on the download button below. Note the directory and path where the file has been saved. You will need to access this file on your PC.
Close any applications you may have open is recommended.
Install this file by clicking Start then Run on your PC. Select Browse and find the directory where the file had been saved. Double-click on the file to start the install.
Please note that this file will install the update immediately.

HP LaserJet 3015/3020/3030/3380 Fix Scan Utility, v3.1 for Windows 2000/XP/98SE/ME/Server 2003

HP LaserJet 3015 firmware update utility, v20040802 Rev E, for Windows 98SE, Me, NT4, 2000, XP, and Server 2003

HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

Review this document for a complete list of devices supported by HP Mobile Printing for Notebooks.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.

HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

Review this document for a complete list of devices supported by HP Mobile Printing for Notebooks.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380pcl5ewinnt4). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380pcl6winnt4). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Note: This package contains only the printer driver for the product. This package does not contain the scan, fax, or device communication drivers. Installing this print driver for all-in-ones connected via USB or parallel where the communication port does not already exist can result in the Found New Hardware Wizard appearing after every reboot of the computer.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. (i.e., c:\lj30xx_3380pswinnt4). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
To add the printer driver to an existing port (LPT, USB, network share, or HP Jet Direct Print Server)
Click Add Printer
Follow the instructions of the Add Printer Wizard (select the appropriate port when prompted).
Click on the Warning Box that pops up.