AboCom FE1000VX Download Drivers

Available 1 files for FE1000VX
Company
AboCom
Categories
Networks Cards
Model
AboCom FE1000VX
Description
Drivers
Operating Systems
DOS NDIS2-Windows 95-98-Me-NT4-2000-XP
Size Driver
519Kb
File Name
fe1000vx_v1.05.exe
Info
CONTENTS

1. Notes on Setup
2. Install PCMCIA Software manually
3. Drivers Supported on this Drivers Disk
4. Notes on using EMM386 or QEMM
5. Technical Support

The following is the important information of AboCom FE1000VX installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the FE1000VX model that was downloaded (for example c:\FE1000VX). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card AboCom FE1000VX in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which AboCom FE1000VX Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "AboCom FE1000VX"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your AboCom FE1000VX.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for FE1000VX has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by AboCom, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by AboCom for FE1000VX.

AboCom FE1000VX Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "AboCom FE1000VX" then a properties page appears.


Available 1 Drivers

HelpDrivers Since March 2000